| Select IC Type: | 6 Pixels/Meter (Base) |
|---|---|
| Select Input Voltage: | DC24V (Base) |
| Select Installation: | Adhesive Backing + Brackets, Adhesive Backing (Base), Mounting Brackets |
| Select Length: | 40m (131ft) - Power both sides (Base), 35m (114.8ft) - Power both sides |
| Select PCB Width: | 12mm (0.47in) (Base) |
| Select Waterproof Rating: | IP20 Non-Waterproof (Base), Outdoor IP67 (Silicone Sleeve Protection), Submersible IP68 (Silicone Fully Potted) |
| Availability | In Stock |
| Condition | Brand New |
Simplified Digital Lighting for Mega-Scale Architecture
For addressable LED strip lighting projects exceeding 20 meters (65.6 feet), the complexity of wiring and power injection often becomes a deterrent for many users. While our 20M and 30M series revolutionized long-run pixel lighting, the 40M Ultra Long Run Series takes it a step further. This TM1934 IC LED strip is specifically designed for large-scale commercial perimeters, theater aisles, and long hallway accents where installation speed and budget efficiency are the top priorities.
What makes the 40M version unique is its optimized IC-to-LED ratio. By utilizing 6 Pixels and 5-6W per meter, we have significantly reduced the total current load and data complexity. Even at a massive 40-meter (131-foot) length, you only need a pixel LED controller with a modest 240-pixel capacity and a single 300W-350W power supply. This design drastically cuts the cost of pixel controllers and minimizes the need for complex power injection points, making it the most cost-effective "mega-run" addressable solution on the market today.
| Feature | 20M Version | 30M Version | 40M Ultra Run |
|---|---|---|---|
| Power Profile | Higher Power Output (10.5 W/m) | Higher Power (10.5 W/m) | Optimized Low Power (5-6 W/m) |
| Pixel Count | 10 Pixels Per Meter (1 IC controls 6 LEDs) | 10 Pixels Per Meter (1 IC controls 6 LEDs) | 6 Pixels Per Meter (1 IC controls 10 LEDs) |
| Voltage Drop | Slight drop at tail end (RGB white) | Requires dual-end power | Zero Drop up to 20M |
| Wiring Logic | Single-Side Power Supply | Dual-Side Power Supply | Dual-Side Power Supply |
The 40M ultra-long RGB-IC led strip has a theoretical max current of 10A. Proper power management is key:
• Direct Connection: If your pixel controller supports 10A-12A+ current like our WLED controller series, follow: TM1934 Strip → TM1934 Controller → DC24V Power.
• Separate Power: If using a low-amperage controller, please power the led strip and the controller independently to avoid damaging the control board. At this point, the controller only outputs signals to the digital LEDs (only the signal wires and the negative wire connected).
| Model Number | TM1934-40M-24VX60W12 |
| Brand | SuperLightingLED™ |
| Input Voltage | DC24V |
| PCB Width | 12mm |
| LED Type | SMD 5050 RGB |
| IC Type | TM1934 (External) |
| LED Quantity | 60 LEDs per meter |
| IC / Pixel Quantity | 6 Pixels per meter (Total 240 Pixels) |
| Power Consumption | 5W - 6W per meter |
| Strip Length | 40 Meters (131.2ft) Continuous |
| Waterproof Rating | IP20 / IP67 / IP68 Options |
| Cutting Interval | Every 166.6mm (10 LEDs per cut) |
| Solder Pad Function | +24V, Data, GND |
| Connector Type | 3-Pin JST-SM Connectors + 2-Pin Power Connectors |