| Select Kit: | LED Strip Only (Base), LED Strip + DC Female Connector |
|---|---|
| Select LED Quantity: | 480Chips/m (Base) |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Color : | Natural White(4000K) (Base), Daylight White( 6500K) (Base), Warm White (3000K) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Transparent Heat Shrink Tube IP67 |
| Availability | In Stock |
| Condition | Brand New |
Introducing the narrowest COB LED strip available on the market. With an unprecedented PCB width of just 2mm, this ultra-slim LED strip opens up new possibilities for lighting in confined spaces where standard strips cannot fit. It utilizes advanced Chip-on-Board (COB) technology to produce a completely uniform, dot-free line of light, perfect for high-end aesthetic applications. The high density of 480 LEDs per meter ensures brilliant and consistent illumination. Operating on a safe, low-voltage DC 5V, this 2mm COB LED strip is the ultimate solution for intricate DIY projects, scale models, detailed backlighting, and any application demanding a discreet yet powerful light source. Its flexibility and slim profile allow for seamless integration into the most challenging designs.
At only 2mm wide, this strip is designed for edge-lighting, fine-detail backlighting, and micro-channel applications previously impossible with standard LED strips.
COB technology eliminates LED hotspots, creating a single, continuous line of smooth, beautiful light.
Features 480 LEDs per meter for a bright, consistent, and powerful light output suitable for accent and task lighting.
Safe to handle and ideal for DIY electronics, battery-powered projects, wearables, and USB-powered applications.
Highly flexible to bend around curves and can be cut every 12.5mm (0.49in) for precise, custom-length installations.
| Parameter | Details |
|---|---|
| Product Model | FSLCOB-2MM-480-5V |
| Input Voltage | DC 5V |
| Power Consumption | 5 Watts per meter |
| LED Type | Chip-on-Board (COB) |
| LED Density | 480 LEDs per meter |
| Dimensions | W2mm*H1.7mm (bare strip) |
| Luminous Flux | 40-60 lm/W |
| Color Rendering Index (CRI) | Ra > 90 |
| Color Temperature Options | 3000K / 4000K / 6500K (white) |
| Beam Angle | 180° |
| Cutting Increment | Every 12.5mm (0.49 inch) |
| Reel Length | 5 meters (16.4 feet) |
| IP Rating | IP20, IP67 |
| Operating Temperature | -20°C to +50°C |
| Recommended Max Run Length | 2 meters (to avoid voltage drop) |
Q: Can this 2mm LED strip be cut to a custom length?
A: Yes, this strip can be cut at the designated solder pads, which are located every 12.5mm along the strip.
Q: What is the maximum length I can run in a single piece?
A: Due to its low 5V input voltage, we strongly recommend a maximum continuous run of 2 meters (6.5 feet) to avoid voltage drop and ensure even brightness. For longer installations, you must supply power at multiple points.
Q: What kind of power supply do I need for this 2mm COB strip?
A: You need a regulated DC 5V power supply. To calculate the required wattage, multiply the length of your strip in meters by 5W/m, then add 20% headroom. For a 2-meter section, you would need (2m * 5W/m) * 1.2 = 12W, so a 5V 2.5A power supply or greater is recommended.
Q: Is this micro LED strip dimmable?
A: Yes, it is fully dimmable. You can control the brightness using a compatible 5V single-color PWM LED dimmer or controller.
Q: What makes COB technology better than traditional SMD LED strips?
A: COB (Chip-on-Board) technology places LED chips directly on the circuit board and covers them with a continuous layer of phosphor. This creates a completely seamless and dot-free line of light, eliminating the hotspots seen with individual SMD LEDs.
Q: How do I connect wires to a strip this narrow?
A: Due to the 2mm width, careful soldering is the most reliable connection method. Ensure you use a fine-tipped soldering iron and thin gauge wire. No available 2mm LED connectors.