| Select LED Quantity: | 96LEDs/m (Base) |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Color : | Daylight White( 6500K) (Base) |
| Select PCB Width: | 8mm (0.31in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
This DC12V addressable LED strip pairs SMD3535 LEDs with the built-in 2814 IC to deliver programmable 6000-6500K daylight white illumination across an ultra-narrow 8mm white PCB. Engineered with break-point resume transmission, the backup signal line ensures that a single failed LED does not interrupt downstream communication. Running at 10W/m with 96 LEDs/m, it generates dense, uniform light output. It integrates directly into WS2814 ecosystem, providing individual pixel-level sequencing for architectural niches, gaming setups, and stage production displays.
Dual-signal data lines permit continuous transmission so downstream 12V pixels remain operational even if one LED chip fails.
High component density on an 8mm PCB produces smooth daylight running-water and chasing effects with minimal dark spacing.
Narrow circuit board geometry fits into standard and slim aluminum channels without edge pinching.
Pairs directly with an external WS2814-compatible addressable white LED controller for custom color palettes and dynamic programming.
| Parameter | Details |
|---|---|
| Model SKU | WS2814-DW-12V-96W8 |
| Operating Voltage | 12V DC |
| LED Chip Type | SMD3535 |
| LED Density | 96 LEDs/m |
| Total LED Count | 480 LEDs per 5m reel |
| IC Protocol | WS2814 (Breakpoint Resume Transmission) |
| Color Configuration | 6000-6500K Daylight White |
| Color Rendering Index (CRI) | Ra 80+ |
| Power Consumption | 10W/m (50W per 5m reel) |
| PCB Width | 8mm |
| PCB Color | White |
| Reel Length | 5m (16.4ft) |
| Ingress Protection | IP20 Non-waterproof / IP67 Tube Waterproof options |
| Beam Angle | 120 degrees |
| Signal Wiring | VCC (+12V), GND, Data (DI), Backup Data (BI) |
Q: What is the benefit of the WS2814 break-point resume IC?
A:The WS2814 IC incorporates dual-channel data lines (DI and BI). If an individual LED chip or driver circuit fails, the backup signal pathway bypasses the broken unit so downstream pixels continue operating normally.
Q: What power supply is required for a 5-meter reel?
A:The strip consumes 10W per meter, totaling 50W for 5 meters. A 12V DC constant-voltage power supply rated for at least 60W is required to supply sufficient 20% operating headroom.
Q: Is this WS2814 LED strip dimmable?
A:Yes, brightness and individual color levels are fully dimmable from 0% to 100% via compatible SPI and digital pixel controllers.
Q: Can I connect multiple 5m reels end-to-end?
A:Data signals can travel across multiple reels, but 12V DC power must be injected every 5 meters to prevent voltage drop and dimming toward the far end of the installation.