Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-23 | ID: 7326

2 Pin Dupont Male to Surface Contact Connector Transparent Cord 150cm For Solderless Neon Light Strips

MODEL: NEONACC-2PDP-150CM-SSC
Price based on selections below:
$1.20
Apply to:16*16mm Neon Flex (Base), 12*10mm Neon Flex (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The power pigtail cord connects cut sections of single-color dotless neon LED strip directly to multi-port distribution blocks without soldering. Engineered with a specialized 2-pin pressure-contact head at one end and a standard 2-pin Dupont male connector at the other, this 1.5m (59-inch) transparent 22AWG cable simplifies millwork and cabinet lighting runs. 

By eliminating manual wire soldering onto tiny neon pads, installers can cut continuous neon LED strip into precise lengths for display cases, shelving, or toe kicks, then snap each segment into this power pigtail cord. Each wire routes into a central junction block before connecting to your primary DC 24V power supply, maintaining clean wiring paths inside tight joinery.

Core Technical Advantages

Solderless Neon Contact Interface

Pressure-contact terminal locks securely onto the contact pads of cut-to-length flexible neon LED strip without heat or flux.

Standard 2-Pin Dupont Male Plug

Terminates in a compact 2-pin Dupont connector that plugs straight into multi-port distribution splitters.

Discrete 22AWG Transparent Wire

Parallel 2-conductor copper wire features a clear jacket that blends against light cabinetry, millwork, and furniture surfaces.

1.5-Meter Extension Reach

Provides 150cm (59 inches) of factory-assembled wire to run cleanly through cabinet partitions to central driver boxes.

System Architecture & Wiring Efficiency

  • Eliminates on-site iron soldering on sensitive silicone neon jackets, cutting prep time down to seconds per segment.
  • Built specifically for pairing cut-anywhere single-color neon LED strips with localized multi-channel distribution boxes.
  • Compatible with modular cabinet lighting accessories and junction hubs commonly specified in residential casework.

Product Specifications

ParameterDetails
Product Model (SKU)NEONACC-2PDP-150CM-SSC
Product Sub-TypeSolderless Neon Power Pigtail Cord
Input Terminal2-Pin Pressure Contact Pad Connector
Output Terminal2-Pin Dupont Male Connector (2.54mm Pitch)
Conductor Count2-Core Parallel
Wire Gauge22 AWG Stranded Copper
Overall Cable Length150 cm (1.5 m / 59 in)
Cable Jacket StyleTransparent Clear PVC
Rated Operating VoltageDC 5V, DC 12V, DC 24V
Compatible Strip TypeSingle-Color Cut-Anywhere Neon LED Strip
Connection TypeTool-Free Press-Fit / Plug-and-Play
IP Rating at TerminalIP20 (Indoor dry locations)

Recommended Installation Scenarios

Under-Cabinet & Upper-Cabinet Millwork RunsRun individual 1.5m transparent lines from recessed cabinet neon LED strip segments through 8mm drill holes directly back to a central Dupont junction block mounted above the upper cabinets.
Custom Wardrobe & Closet Shelf LightingFeed multiple partitioned shelf strips back into a shared power distributor. The transparent 22AWG cord stays hidden along vertical shelf standards without drawing attention.
Retail Showcase & Glass Display VitrinesConnect short, dot-free neon LED strip accent outlines in display cases back to a concealed power distribution terminal.
Floating Vanity & Furniture KickplatesJoin low-profile toe kick neon runs cleanly to remote drivers tucked inside adjoining dry wall cavities or mechanical access panels.

Installation and Connection Steps

  1. Cut your single-color neon LED strip along the designated cutting line to expose the conductive copper contact pads.
  2. Align the positive (+) and negative (-) pads of the neon LED strip with the contact pins inside the pigtail head.
  3. Firmly seat the neon LED strip end into the contact housing until the internal pins firmly engage the copper pads.
  4. Route the 1.5m transparent 22AWG wire through your millwork or cabinet wire chases toward your junction area.
  5. Insert the 2-pin Dupont male connector directly into the corresponding port of your multi-way Dupont distributor hub (sold separately).
  6. Verify polarity before energizing your main DC power supply.

⚠ Precautions

  • Ensure the neon LED strip contact pads are completely clean and free of silicone debris before closing the connector clip.
  • Verify that your distributor box matches the 2-pin Dupont male pin configuration before connecting.

What is in the Box

  • ✓1 x 1.5m 22AWG 2-Pin Neon Contact to Dupont Male Power Pigtail Cord

 

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.