Closet and cabinet lighting parts and accessories are intended to complement cabinet puck lights or cabinet LED strips with lighting details such as connecting multiple cabinet light fixtures together or extending the cord length of a cabinet fixture to plug into an outlet, etc. This flexibility allows you to easily adjust the lighting layout for different applications when DIY your own cabinet and closet lighting. By using these closet and cabinet lighting accessories, you can complete your cabinet lighting installation more easily.
LED Cabinet And Closet Lighting
Sponsors
Sponsors
Cabinet Lighting Accessories
(0)Model:SC-ACCESSORIE-DP01
2-Pin Dupont Male Female LED Connector For Single Color LED Strip Lights
- Type: board to wire
- Length: 0.15/1/2/3/4/5m
- Pin: 2
- Apply to: single color led strip
This is a type of solderless fast connector for single color led strip lights . One end with male/female plug, and the other end with 2-pin power wire. Cable with black marks is the negative pole, and cable with writing is the positive pole. The product includes a dupont female connector and a dupont male connector. If your strip light is no wire at the end, you can use a...
(0)Model:SC-ACCESSORIE-DP
2-Pin Male Female Dupont Connector Extension Wire For Stair Lights, Puck Lights
- Type: Extension wire
- Length: 1/2/3/4/5m
- Pins: 2
- Wire Gauge: 22AWG
This is a Dupont connector to extend distance, with male plug at one end and female plug at the other end. Compatible with SC-ACCESSORIE-DP01 female wire connector and male wire connector to use. In our stair lights kit , the strip lights are with dupont male connector at the end, you can use this extension cable to adapt the distance between the controller and the stair...
(0)Model:PBL-60-24
PBL-60-24 60W 100 to 240VAC Constant Voltage SELV LED Driver
- Input Voltage: 100～240VAC
- Output voltage: 24VDC
- Output Power: Max. 60W
- Output current: Max. 2.5A
- Dimming Range: 0～100％
- Frequency Range: 50/60Hz
- Size: 164x55x18mm
- Gross weight: 170g
The PBL-60-24 LED driver has a 100-240VAC input range, so it may be used with a variety of power sources across the world. With a single channel constant voltage output and a maximum output power of 60W, this LED light driver is appropriate for a wide range of lighting applications. This 24V LED driver's ultra-thin design provides users with great efficiency and light weight. In addition, the...
(0)Model:PBL-60-12
60W 12V 1CH Constant Voltage LED Cabinet Light Driver PBL-60-12
- Input Voltage: 100～240VAC
- Output Voltage: 12VDC
- Efficiency: 88%
- Output Current: Max. 5.0A
- Output Power: Max. 60W
- Dimming Range: 0～100％
- Size: 164x55x18mm
- IP rating: IP20
To create a perfect cabinet LED lighting application, you need to consider how to power the LED strip lights and how to place the LED power supply driver. This Constant Voltage LED Cabinet Light Driver with a slim design, can be directly connected to a LED strip, or you can be used with 6CH CV0/CV1/CV2 device to match sensor dimmers to control the LED lights. ● 1CH Constant Voltage...
-6CH-WiFi-RF-Sensor-LED-Shelf-Lighting-Dimmer.jpg "CV1(WT) 6CH WiFi RF Sensor Synchronous LED Shelf Lighting Dimmer")
(0)Model:CV1(WT)
CV1(WT) 6CH WiFi RF Sensor Synchronous LED Shelf Lighting Dimmer
- Input Voltage: DC12-24V
- Output Voltage: DC12-24V
- Output Power: Max 60W
- Output Channel: 6CH
- Control Method: WiFi Tuya+RF+Sensor
- IP Raing: IP20
CV1(WT) is a smart led strip shelf lighting dimming controller for single white led tape lights , compatible with WiFi Tuya APP control (brightness adjust, delay turn on/off light, timer run, scene edit function), RF remote control, and sensor control (need to buy a sensor separately) . Voice control is available, support amazon ECHO and TmallGenie smart speaker. Match with RF 2.4G single zone...
(0)Model:CV0
12-24VDC Synchronous 6CH LED Junction Box CV0, Compatible With Sensor Control
- Voltage: DC12-24V
- Current: Max 2A/CH
- Power: Max 60W
- Temperature: Ta: 45℃
This is a 6CH LED Controller that is compatible with multiple sensor switches or dimmers such as ER PIR Motion Sensor, EW Wood Touch Sensor, EC Touch Sensor, ED/ED(C) Door Sensor, EB/EB(C) Hand Sweep Sensor. The 6CH LED Junction Box maximum load limit is 60W. With DC12V-24V input, it can be connected to a standard LED power supply, or matched with PBL-60-12 LED Cabinet Light Driver to use...
(0)Model:CV1
12VDC 6CH RF & Sensor Synchronous Dimmable LED Control Box CV1
- Voltage: DC12V
- Power: Max 60W
- Control: RF+Sensor
- Dimmable: Yes
This 6CH LED Control Box is compatible with RF DIM remote control and sensor control , such as ER PIR Motion Sensor, EW Wood Touch Sensor, EC Touch Sensor, ED/ED(C) Door Sensor, EB/EB(C) Hand Sweep Sensor, and EM Microwave Motion Sensor. Suitable for cabinet LED strip lighting applications. ( Note: When the control box is matched with a PIR motion sensor, there is no RF function.) You can choose...
(0)Model:CV2
12VDC 6CH RF & Sensor Synchronous CCT LED Controller CV2
- Voltage: DC12V
- Power: Max 60W
- Control: RF+Sensor
- Color: CCT
This 6CH LED Controller is for CCT tunable white led strips , compatible with CCT RF remote control and sensor control , such as ER PIR Motion Sensor, EW Wood Touch Sensor, EC Touch Sensor, ED/ED(C) Door Sensor, EB/EB(C) Hand Sweep Sensor, and EM Microwave Motion Sensor. (Note: When the control box is matched with a PIR motion sensor, there is no RF function.) The 6CH CCT LED Controller is...
(0)Model:CL-ACC-DP-6Way
6 Way DuPont Splitter Under Cabinet Lighting Junction Box
- Type: Splitter Box
- Connector: DuPont
- Light Ports: 6
- Length: 175mm/7"
The 6-port Dupont connector splitter junction box is a connection device used in cabinet lighting systems. It divides a Dupont port into 6 channels to connect 6 separate cabinet light fixtures. This 1 in 6 out splitter box allows multiple cabinet fixtures with DuPont connectors to be connected to the same power source or controller. In this way, the cabinet lighting system can be...
(0)Model:CL-ACC-DP-10Way
10 Way DuPont Light Wire Under Cabinet Electrical Box
- Type: Splitter Box
- Connector: DuPont
- Light Ports: 10
- Length: 175mm/7"
The 10-in-1 10 way junction box is the perfect companion to cabinet lighting systems, designed for situations where expanded and simplified lighting wiring is required. With 10 individual connection ports, this breakout box can easily handle complex cabinet and closet lighting needs. Supports simultaneous connection of up to 10 cabinet fixtures with DuPont connectors for large-scale...
