Spec Sheet - FSLCOB-5VRGB-576W5

Select Connector:	Waterproof Wires, 4-Pin Plug Connectors (Base)
Select Length:	16.4ft (5 meters) (Base)
Select Waterproof Rating:	Non-Waterproof IP20 - Adhesive Back (Base), Transparent Heat Shrink Tube IP67, Outdoor Silicone Tube IP67 - Adhesive Back
Availability	In Stock
Condition	Brand New

This DC 5V COB RGB LED strip light delivers continuous, dot-free color mixing across an ultra-narrow 5mm PCB with a low profile height of 2.3mm. Engineered with a dense 576 LEDs per meter configuration, this multi color rgb light strip eliminates visible diode spots even when installed without a diffuser lens. Operating at 10W per meter on safe 5V direct current, it runs directly from portable power banks, USB sources, or dedicated 5V DC power adapters.

Each 5-meter reel comes equipped with dual-ended 4-pin connectors for immediate integration with standard RGB controllers. Direct compatibility with RF RGB controllers and compact IR remote RGB control boxes for 3-channel dynamic color adjustment.

Key Features

576 LEDs/m COB Density

Continuous coating produces unbroken, dotless multi color illumination without dark spots.

5mm Ultra-Narrow PCB

Slim 5mm width and 2.3mm profile fit into miniature aluminum profiles, tight gaps, and compact enclosures.

DC 5V Low-Voltage Operation

Safe operating voltage allows direct power from rechargeable battery packs, 5V power adapters, and USB ports.

Pre-Soldered 4-Pin Terminations

Both ends feature 4-pin male and female plug-in connectors that interface with standard RGB controllers.

Selectable Ingress Protection

Supplied standard in IP20 for indoor dry areas with an optional IP67 silicone sleeve version for moisture resistance.

Product Specifications

Parameter	Details
Product SKU	FSLCOB-5VRGB-576W5
Working Voltage	DC 5V
Rated Power	10W/m (approx. 50W per full 5m reel)
LED Density	576 LEDs/m
LED Packaging Type	COB (Chip on Board)
Color Format	RGB Multi-Color (Red, Green, Blue)
PCB Width	5mm (0.20 in)
Strip Height	2.3mm (0.09 in)
Standard Reel Length	5 meters (16.4 feet)
Max Continuous Run (Single Feed)	1.0m to 1.5m (requires parallel injection for longer runs)
Connection Interface	4-pin plug-in connector pre-installed on both ends
Control Protocol	Common Anode (+5V, R-, G-, B-) PWM dimming
Ingress Protection Rating	IP20 indoor dry (IP67 silicone jacket optional)
Strip Color	White
Adhesive Backing	Self-adhesive double-sided mounting tape
Beam Angle	180 degrees
Cut Unit	20.83mm (0.82in)

Application Scenarios

Battery-Powered and Wearable Cosplay LightingOperating on DC 5V, this led strip cob light connects directly to compact 5V power banks for wearable costumes, convention props, and portable theatrical rigs.

PC Case Mods and Desktop Peripheral BacklightingIntegrate this strip cob led into custom computer cases and monitor surrounds. Connecting to internal 5V headers or external 4-pin RGB LED strip connectors delivers uniform color blending without reflective LED hotspots.

Automotive Interior and Portable Equipment AccentsLow-voltage 5V operation enables safe installation in vehicle cabins, glove boxes, and customized instrumentation panels requiring low-heat, short-run multi color rgb led lights.

How to Install & Use This LED Strip

Measure your required run length and cut only along the designated copper solder cut lines marked on the 5mm PCB.
Connect the pre-fitted 4-pin connector to your 5V RGB controller, ensuring the +5V polarity arrow aligns with the controller power channel.
Perform a dry test by powering the system with a compatible 5V power supply before removing the adhesive liner.
Peel back the adhesive release paper and press the LED strip firmly onto the target surface, holding pressure along the run.
For runs exceeding 1.5 meters, wire additional 5V power feed wires in parallel to prevent voltage drop and color shifting.

⚠ Precautions

Do not power this LED strip with 12V or 24V power supplies; applying more than 5V DC will permanently damage the COB diodes.
Single-ended power feeds should not exceed 1.0 to 1.5 meters due to low-voltage resistance; longer runs require dual-end feeds or power injection.

What's in the Box

✓1 x 5-meter reel of 5V 5mm COB RGB LED Strip Light (576 LEDs/m)
✓2 x Pre-attached 4-pin male/female plug-in connectors (one on each reel end)

DC5V Multi Color RGB LED Light Strip 5mm COB 576 High Density Ambient Glow