Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-16 | ID: 7363

Black Aluminum LED Carpet Edge Profile Channel for 12mm Strip Lights

MODEL: SLL-ALU-ALP209
Price based on selections below:
$28.98
Select Channel Color:Black (Base)
Select Diffuser:PC opal diffuser (Base)
Select Length:3.28ft (1 meter) (Base), 6.56ft (2 meters), 20cm (7.87in) Sample
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The ALP209 carpet edge trim LED strip channel secures floor transitions while providing low-profile path illumination along commercial carpet borders. Built from 6063-T5 aluminum alloy with a black anodized finish, this extrusion integrates a 5.0mm carpet-retaining step, a 62.61mm wide base with a serrated ramp for foot traction, and a 12.3mm internal channel sized for standard LED strips. As part of our specialized carpet transition strip profiles, it shields wire runs from foot traffic and acts as an extruded heat sink to maintain diode operating temperatures. Pair this extrusion with our flexible COB LED strips to create completely dotless edge lighting, or deploy long LED strips for continuous long-run commercial perimeters without voltage drop. 

Key Features

Integrated 5mm Carpet Lip

Recesses standard commercial carpet tiles or low-pile glue-down carpet cleanly against the metal threshold to stop fraying.

Serrated Anti-Slip Ramp

Features a 62.61mm wide sloped profile with machined grooved ridges that enhance foot grip across high-traffic floor thresholds.

12.3mm Internal Strip Width

Accommodates any single-row flexible LED strip or rigid light board measuring up to 12.0mm wide.

Black Anodized Surface

Resists abrasion, scuffing, and oxidation in hospitality, retail, and commercial office walkways.

Technical Highlights

  • Internal track width of 12.3mm accommodates standard 8mm, 10mm, and 12mm wide flexible LED strip formats.
  • Profile cross-section measures 62.61mm wide by 11.22mm overall height, with a 5.0mm vertical ledge engineered for floor covering alignment.
  • Curved ramp geometry reduces trip risks at floor transitions while shielding linear optical components.
  • Milky polycarbonate lens provides 70% to 75% light transmission with uniform beam diffusion to eliminate glare.
  • Machined linear serrations increase surface friction for pedestrian safety in active commercial spaces.
  • Available in 20cm evaluation samples, 1-meter lengths, and 2-meter production segments to accommodate varied job site scales.

Product Specifications

ParameterDetails
Model NumberSLL-ALU-ALP209
Product TypeCarpet Edge Trim LED Strip Channel
MaterialExtruded 6063-T5 Aluminum
Surface FinishBlack Anodized
Diffuser MaterialShatter-Resistant Polycarbonate (PC)
Diffuser FinishMilky Frosted
Profile Outer Width62.61mm (2.46 in)
Profile Outer Height11.22mm (0.44 in)
Internal Channel Width12.30mm (0.48 in)
Carpet Flange Height5.00mm (0.20 in)
Maximum LED Strip Width12.00mm
Available Lengths20cm sample, 1.0m, 2.0m
Mounting MethodCountersunk screws or polyurethane floor adhesive
Included HardwareAluminum channel, milky diffuser cover, matching end caps
CuttableYes, using fine-tooth metal cutting blade

Application Scenarios

Commercial Office Carpet-to-Tile TransitionsInstall between open-office carpet sections and ceramic hallway tile to create illuminated boundaries that alert personnel to level changes in low-light environments.
Hotel Corridors and Suite EntriesProvide soft hospitality accent illumination alongside room thresholds while clamping carpet fibers firmly to the subfloor.
Auditorium and Cinema Aisle PathwaysEstablish continuous step and aisle demarcations that withstand dense foot traffic without loosening, thanks to the serrated slip-resistant ramp surface.
Restaurant Lounge and Bar PerimetersDeliver indirect floor-level lighting that highlights architectural finishes without projecting direct diode reflection into seating zones.

What's in the Box

  • ✓1x SLL-ALU-ALP209 black carpet edge aluminum profile
  • ✓1x Snap-in milky PC diffuser cover
  • ✓2x End caps

Frequently Asked Questions

Q: What width LED strip fits in this channel?

A: The internal channel width is 12.3mm, which accepts any standard LED strip measuring up to 12.0mm wide, including 8mm, 10mm, and 12mm flexible strips.

Q: What carpet thickness is this profile designed for?

A: The profile features a 5.0mm vertical carpet flange, making it suitable for standard low-pile commercial carpeting, glue-down carpets, and thin carpet tiles.

Q: Will it hide the dots / give a smooth line of light?

A: Yes, when paired with high-density LED strips containing 120 or more LEDs per meter, or COB LED strips, the milky polycarbonate diffuser creates a uniform, continuous line of light without hot spots.

Q: How to install led channel?

A: Secure the channel base to the subfloor using countersunk screws or floor adhesive, stick the LED strip into the internal track, wire the feed through the end cap, and snap the diffuser cover in place.

Q: Does it help cool the LED strip?

A: Yes, the 6063-T5 aluminum housing acts as a thermal conductor that dissipates heat generated by the LED strip, keeping diodes cool and extending operational life.

Q: What is the purpose of the serrated ridges on the ramp?

A: The serrated ridges run linearly along the 62.61mm wide sloped profile to provide tactile traction, reducing slipping risks for pedestrian traffic at floor transitions.

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.