Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 2539

3Pin LED Connector Single End with 15cm Long Cable LED Strip Solderless DIY Connector Adapter for WS2811 WS2812B SK6812 LED Flexible Strip Lights

MODEL: CT-ACCESSORIE-009
Price based on selections below:
$0.85
Select PCB Width:10mm (0.39in) (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Streamline your custom lighting projects with our 3-Pin Solderless LED Strip to Wire Connector designed for speed and reliability. This single-end, strip-to-wire connector eliminates the need for soldering, allowing you to create a secure connection from your LED strip to a controller or power source in seconds.It's the perfect solution for DIY enthusiasts and professionals working with 10mm wide, 3-pin addressable LED strip lights like the popular WS2811, WS2812B, and SK6812 series. The integrated 15cm pigtail with bare wire ends provides immediate flexibility for wiring into your setup, making it an essential tool for creating clean, custom-length lighting installations, repairs, or modifications without the hassle of a soldering iron.

Key Features

Effortless Solderless Connection

Features a user-friendly flip-clasp design that securely bites into the strip's contacts, creating a strong electrical connection without any soldering.

Broad 3-Pin Compatibility

Specifically engineered for 10mm wide 3-pin addressable LED strips, including WS2811, WS2812B, and SK6812, as well as 3-wire CCT LED strips.

Ready for Wiring

Comes with a pre-attached 15cm (6-inch) 3-conductor cable, providing a ready-to-use pigtail for easy connection to controllers or power wiring.

Reusable and Reliable

The durable clasp can be opened and re-closed multiple times, making it ideal for prototyping, adjustments, and quick repairs on your projects.

Designed for Bare Board Strips

Optimized for a perfect fit and connection with non-waterproof (IP20) LED strips that do not have a silicone or epoxy coating.

Product Specifications

Parameter Details
Model CT-ACCESSORIE-009
Product Type Single-End Solderless Connector (Strip-to-Wire)
Pin Count 3-Pin
Compatible Strip Width 10mm
Compatible Strip Type SMD LED Strips (Bare Board / Non-Waterproof Only)
Supported ICs WS2811, WS2812B, SK6812, etc.
Other Compatibility 3-Wire CCT (Tunable White) LED Strips
Wire Length Approx. 15cm / 6 inches
Wire Leads 3 Bare Wires (Brown, Yellow, White)
Voltage Rating DC 5V - 24V
Material Plastic, Copper
Installation Solder-free, Clamp-down
Reusability Yes

Application Scenarios

Custom Addressable LED Projects An essential component for DIY builders creating custom-length WS2812B lighting for PC cases, home theaters, or artistic displays. This connector provides a clean strip end to easily wire into an addressable controller.
Rapid Prototyping and Repairs Quickly test segments of 3-pin LED strips or repair a damaged connection without heat. The reusable design allows you to connect and disconnect strips as you refine your lighting layout.
Tunable White (CCT) Installations While ideal for addressable LEDs, this connector is also fully compatible with 3-wire CCT strips, providing a simple way to connect your tunable white lighting to a CCT-specific dimmer or controller.

How to Use This 3-Pin Solderless Connector

  1. Ensure the power to your LED strip circuit is completely off.
  2. Gently flip open the white plastic clasp on the connector housing.
  3. Observe the polarity markings on your 10mm LED strip (e.g., +5V, DIN, GND).
  4. Carefully slide the end of the LED strip into the connector. Make sure the copper pads on the strip sit directly underneath the metal contact pins inside the connector.
  5. Firmly snap the hinged clasp shut. You should feel it click securely into place.
  6. The three bare wire leads are now ready to be connected to the corresponding terminals on your controller or power supply.

3Pin LED Connector Single End with 15cm Long Cable LED Strip Solderless DIY Connector Adapter for - photo 9

⚠ Precautions
  • This connector is designed for use with non-waterproof (IP20) LED strips only. It is not suitable for strips with a silicone or epoxy coating.
  • Always double-check the alignment of the strip's pads with the connector's pins before closing the clasp.
  • Ensure the strip width is exactly 10mm for a secure fit.
  • After closing, give a gentle tug on the strip and wires to confirm the connection is firm and reliable.

What's in the Box

  • ✓1 x 3-Pin Single End Solderless Connector with 15cm Cable

Frequently Asked Questions

Q: What is the purpose of the single-end design?

A:This is a 'strip-to-wire' connector. It is used to connect the end of an LED strip to a controller, power source, or another wire, not for connecting two strips directly together.

Q: What do the wire colors (brown, yellow, white) correspond to?

A:Wire color standards can vary between strip manufacturers. Always verify the pinout by checking the markings on your LED strip (e.g., +5V, DIN, GND) and wire accordingly, rather than relying on color alone.

© 2026 SuperLightingLED. All specifications are subject to change without notice.