| Select Connector: | 5-pin JST Connectors (Base), 5-pin 15CM Waterproof Wires, 5-pin Waterproof Fast Connectors |
|---|---|
| Select IC Type: | 16 pixels/m (62.5mm/2.46in a pixel), 8 pixels/m (125mm/4.9in a pixel) (Base) |
| Select Installation: | Indoor Use (Base), Outdoor Use |
| Select Length: | 16.4ft (5 meters) (Base), 32.8ft (10 meters) |
| Select Mounting Clips: | No (Base), Yes - 2pcs per meter |
| Select Wire Outlet: | Side Outlet (Base), Straight Outlet (Base), Bottom Outlet (Base) |
| Select Wiring Type | Single-sided Wire (Base), Dual-sided Wire (Base) |
| Availability | In Stock |
| Condition | Brand New |
DMX512 LED strip neon light, compatible with DMX512 (1990) protocol, using RS486 signal trunking and signal differential transmission mode, high efficiency of data transmission; programmable, control IC with the operating system to achieve water running lighting, popular tail chasing and other fancy light effects, to meet the personality needs of color chasing LED.
LED neon tube using environmentally friendly silicone material, with folding and bending resistance, corrosion resistance, yellowing resistance, UV resistance and other characteristics, waterproof level of IP67, suitable for outdoor lighting, with good heat dissipation; LED density of 96LEDs/m 29LEDs/Ft, low light decay, high brightness, smooth LED alignment and large luminous angle, the top light up to achieve no light spot.
You can choose single-side outlet (half with hole and half without hole) or each-side outlet (end caps with hole) of this DMX512 neon rope light, and the outlet type (straight outlet, bottom outlet, side outlet) depends on your actual project needs. Default 5-pin JST quick connectors, 5-pin waterproof wires (20AWG, white) or 5-pin waterproof fast connectors (small size, white color) optional.
Note: Please do not cut the LED neon light by yourself, if you need to customize, please contact us feel free or leave a note when placing the order.
12*20 LED neon light size
DMX512 LED strip light
Color Chasing RGB water running effect
DC24V low voltage input
Environmental Silicone material
IP67 Waterproof, for outdoor lighting
Good heat dissipation
96LEDs/m 29LEDs/Ft with no spot light
Folding and bending resistance,
Corrosion resistance, yellowing resistance
Standards and Certifications
Product Specification
| Item Type: | Outdoor DMX RGB LED Neon Flex |
| LED Chip: | San'an SMD5050 + 10-pin UCS512H4L/UCS512H6L IC |
| Material: | Silicone |
| Product Size: | 12*20mm |
| Input Voltage: | DC24V |
|
Power:
|
15W/m, 4.6W/ft, 75W/16.4ft, 150W/32.8ft - 8pixels/m
25W/m, 7.6W/ft, 125W/16.4ft, 250W/32.8ft - 16pixels/m
|
| LED Color: | Addressable RGB |
| PCB Width: | 12mm/0.47" |
| LED Quantity: | 96 LEDs/m, 29/ft |
| IC Quantity: |
96LEDs/m - 8 ICs/m (1 IC controls 12 LED lights) 96LEDs/m - 16 ICs/m (1 IC controls 6 LED lights) |
| Cut Unit: (No cut mark) |
8 ICs/m - 125mm/5in 16 ICs/m - 62.5mm/2.5in |
| Waterproof Rating: | Outdoor Waterproof IP67 |
| Strip Length: | 5m/16.4ft, 10m/32.8ft |
| Working Temperature: | -20℃~+45℃ |
| Light Direction: | Side emitting |
| Beam Angle: | 120° |
This DMX neon strip light is driven directly by DMX512 signals. It is recommended to choose an easy-to-use wireless DMX controller such as XC+R9 (RF), SPIW5 (WiFi+RF+Music), SPIB5 (Bluetooth+RF+Music) to directly connect it.
If the power supply is placed indoors, you can choose LRS-200-24 / UHP-200-24 (For 5 meters) or LRS-350-24 / UHP-350-24 (For 10 meters). If the power supply needs to be waterproof, you can check out our 24V waterproof power supply series.
