| Select LED Quantity: | 72LEDs/m (Base) |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select PCB Width: | 10mm (0.39in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Outdoor Silicone Tube IP67 - With Brackets, Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back, Underwater IP68 - With Brackets |
| Availability | In Stock |
| Condition | Brand New |
Elevate your lighting projects with our high-performance WS2811 Addressable RGB LED Strip. Engineered for reliability and ease of installation, this strip features a high density of 72 LEDs per meter, delivering vibrant, seamless color transitions. Designed with a 24V power system, it is the ideal choice for long-run installations where consistent brightness and minimal voltage drop are critical.
While we also offer 8mm versions of the 24V 72 LEDs/m WS2811 strip, this 10mm wide PCB provides a significantly larger surface area. The extra 2mm allows for superior heat dissipation, extending the lifespan of the 5050 LEDs. A wider copper trace reduces internal resistance, ensuring more stable performance during peak brightness.
Each 5-meter roll comes pre-soldered with 3-pin JST SM connectors on both ends. This allows for effortless "daisy-chaining" of multiple rolls and quick connection to your LED controller without the need for immediate soldering.
Ideal Applications
Architectural perimeter lighting
Under-cabinet and cove lighting
Stage and event production
Large-scale DIY LED matrices or signage
Standards and Certifications
Product Specification
Voltage: DC 24V
IC Type: WS2811 (External IC)
LED Type: 5050 RGB SMD
LED Density: 72 LEDs/meter (360 LEDs per 5m roll)
IC Pixel: 12 ICs/meter (60 ICs per 5m roll)
Cutting Unit: 6 LEDs per segment
PCB Width: 10mm
Length: 5 Meters / Roll
Connectivity: 3-Pin JST SM connectors on both ends
How to control addressable LED strips?
Controlling the LED color and brightness changes of addressable LED strips requires compatible addressable LED controllers. These addressable light strips are compatible with SPI protocol and can use SPI controller. The SPI controller has built-in multiple programmed control programs, which can realize a variety of control effects(Flowing water, chasing, jumping, etc.). Support different control methods, WiFi, Bluetooth, remote control, smart phone, voice control, music rhythm, etc. Find the SPI controller you want in our addressable dream color LED controller category.
When selecting the SPI controller, pay attention to the pixels and the operating voltage of the light strip. If the pixel of the SPI controller is smaller than the pixel of the addressable LED strip, it will be impossible to control the extra pixel light of the light strip. For more information about addressable LED controllers and more wiring content, please read: How to wire addressable led strips?
LED controller and power supply are inseparable to enjoy the addressable LED strip. Addressable light strips, SPI controllers and power supply are an integral part of the operation. First, choose the power supply classification according to the voltage, 5V power supply, 12V power supply or 24V power supply. Secondly, the required power supply is obtained according to the power of the light strip. How to calculate the power of the power supply based on the power of the LED strip? The power of the power supply must be at least 1.2 times the power of the light strip to extend its service life. The longer the light strip, the greater the power consumption and the higher the power wattage. If you have waterproof and rainproof requirements for the power supply, you can directly find the corresponding category to view.
The SPI controller is plug and play. If you need other accessories such as 3-pin light strip extension cord or the LED connector, you can find them in the accessories category.
