| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply, LED Strips + Controller |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Color : | Daylight White( 6500K) (Base) |
| Select Waterproof Rating: | Underwater IP68 - Adhesive Back, IP20 Indoor Use (Base), IP67 Waterproof Outdoor Use |
| Availability | In Stock |
| Condition | Brand New |
This COB LED white light strip is specially designed for aluminum channel lighting. One aluminum profile LED strip light can solve the problem of ordinary LED tape light being brighter in the center and dimmer on both sides when installed in a profile, ensuring a more even luminous effect. Multiple color temperatures are available and the PCB width is 15mm.(0.59in)
Double row LED strip light features a creative design: one row on each side of the board, with the solder point in the center. This allows the white COB LED strip to illuminate the darker areas on both sides of the aluminum channel, while maintaining the brightness in the middle, providing a more uniform and clean light. No need to install 2 strips anymore, as it would complicate the wiring process.
In addition to its innovative design, our seamless LED strip has another outstanding advantage: with a single-ended power supply, it can run for 10 meters(32.8ft) without voltage drop. This reduces wiring complexity and easily extends the length of the strip.
Red and black bare wires come out of both ends. Operating on 24V, this dual row LED tape is dimmable with a dimmer. Like other light strips, it is flexible and bendable, easy to install with an adhesive backing, and can be cut to size with scissors. Freely choose waterproof ratings for indoor and outdoor environments.
1.Made for profile lighting: eliminating the dimmer sides, ensuring a uniform lighting.
2.Unique double-row design: one on either side, solder point in the center.
3.High Density: chip-on-board technique, 640 chips across each meter.
4.Long Run: 10 meters(32.8ft) without voltage drop when powered from one side.
5.Color: dimmable white, select from 3000K/4000K/6500K.
6.Dimension: 15mm(0.59in) wide, 5m(16.4ft) or 10m(32.8ft) long.
7.Flexible: can be bent for curved surfaces.
8.Cuttable: cut to size with scissors, the smallest cut is 25mm. (0.98in)
9.Easy to install: pre-applied adhesive backing.
10.Available in IP20 non-waterproof and IP67 waterproof.
If you choose the COB led strip light kit, you will receive a dual row COB LED strip, a SP530E single color controller, and a LRS-350-24 power supply with an AC plug.
If you need water-resistant version, please check our 24V waterproof power transformer category and waterproof controller category.
Here are some profiles recommended for this 15mm LED strip:QSG-2016/ HL-BAPL011/ QSG-2696
Standards and Certifications
|
LED Strip Type:
|
COB Double Row LED Strip Light Designed Profile Lighting |
| Adhesive Backing: | Yes |
| Input Voltage: | DC 24V |
| PCB Width: | 15mm / 0.59in |
| Power: | 20W/m, 100W/16.4ft. 200W/32.8ft |
| LED Color: | Dimmable White (3000K/4000K/6500K) |
| LED Quantity: | 640 LEDs/m, 3200 LEDs/16.4ft, 6400LEDs/32.8ft |
| End: | Bare wires on both ends |
| Cut: | 25mm / 0.98in |
| Beam Angle: | 180° |
| CRI: | Ra>90 |
| Length: | 5m/16.4ft, 10m/32.8ft |
|
Waterproof Rating:
|
IP20 Non-waterproof, IP67 Outdoor Waterproof
|
| Lumen: | 960 lm/ m |
