| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply |
|---|---|
| Select LED Quantity: | 960Chips/m (Base) |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select PCB Width: | 12mm (0.47in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - With Brackets, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
Super Lighting LED, the Leading Manufacturer of Chip-on-Board Light Strips
We have added a new design to our latest 12V FCOB 5-in-1 LED by using black PCB instead of the base white, taking care of the lighting installation needs for applications with dark backgrounds and personalizing the lighting design. Balancing the 960/m high-density LED layout and 12-volt voltage, this RGB CCT cob light strip comes with a good lighting consistency over a length of 5m/roll, whether you choose CW NW WW white colors or RGB static colors, the difference in lighting between the start and the end is not very noticeable. There is a slight voltage drop when lighting all three RGB channels simultaneously - this can be solved by injecting power at the tail end. LRS-150-12 power supply is available if you choose the kit.
There are 200 groups of red, green, blue, warm white 2700K, daylight white 6500K on the PCB, and with the support of the intelligent RGBCCT controller, you can display any color at will. If you want to adjust the light color each channel, please check out our BC-355RF with remote control (controller in the kit).
• 41.66mm (1.64inch) cutting segment
• 3 solder pads on each side of the light emitting surface for quick connection with COB connectors
• With pre-installed back adhesive for effortless installation
Note for diffuser compatibility: The COB 12V RGBWW led strip’s 2.2mm height requires attention when selecting silicone diffusers to ensure proper internal clearance.
Testing has shown that the 2.2mm-height light strips with IP68 waterproofing exhibit an excessively high failure rate. It is recommended to opt for IP67 waterproofing or select a 3.4mm-height RGBCW alternative. |
Product Specifications
| LED Strip Type: | Black COB 12 Volt Rgbcw Rgbww Rgbnw Tape Lighting |
| LED Type: | Chip-on-board |
| Input Voltage: | DC12V |
| PCB Width: | 12mm (0.47in) |
| PCB Height: | 2.2mm |
| Strip Length: | 5m (16.4ft) |
| Power: | 18 W/m, 90 watts /roll |
| Lumen: | 12~70 lm/w |
| LED Quantity: | 960/m, 4800/roll |
| LED Color: | RGBCW 2700K-6500K |
| CRI: | Ra>90 |
| PCB color: | Black |
| Cut Length: | 41.66mm (1.64in) |
| Beam Angle: | 180° |
| Connector: | 6 wires at both ends (black-V+, red-R, green-G, blue-B, white-6500K, yellow-2700K) |
| Connector Length: | 150mm (5.9in) |
| Waterproof Rating: | IP20 bare board, IP67 silicone tube coated |
| Working Temperature: | -20℃ ~ +45℃ |
