Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-02 | ID: 7007

2 Wire Cable End Connector For Waterproof LED Strip Lights

MODEL: WPACC-SC-BTW-2P
Price based on selections below:
$2.50
Select PCB Width:8mm (0.31in) (Base), 10mm (0.39in), 12mm (0.47in)
Select Quantity:1 piece (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The 2 pin waterproof connector for LED strip light is a quick solution for cutting and connecting waterproof LED strip lights. This 2 pin waterproof led strip light connector is designed to connect the end of the outdoor LED strip to a controller or power supply. It has two ends: one end is a connector for fixing the light strip, and the other end consists of one positive red wire and one negative black wire. 

The connector part features a special design with a transparent frame that secures the LED strip to the metal pin points of the connector, and the transparent frame has an open space where the LED strip is pierced. By injecting glue into the frame and then inserting the LED strip, the waterproof performance of the light is ensured without being compromised. This makes it an ideal choice for various wet and outdoor lighting applications where waterproofing is essential.

Note: Please choose the right waterproof connector for led strips 2 pin type according to the width of PCB, the waterproof width of 8mm PCB is about 10mm, the waterproof width of 10mm PCB is about 12mm, the waterproof width of 12mm PCB is about 14mm.

 

• Waterproof connector with white insulated waterproof cable

• Suitable for 2-wire waterproof LED strips with single color or 2-wire CCT (tunable color temperature)

• The pin marked with a "+" on the connector is the positive pole

• The overall length of the connector is approximately 200mm/7.87in

 

Type: LED Light Strips 2 Pin Waterproof Connector Cable

Material: Plastic + Metal Pins

Connection: Strip to Wire

Max Current: 6A

Pins: 2 (if used for cob strip lights, please pay attention to whether the position of the 2 pins corresponds to the position of the solder joints of the COB strip)

Apply to: Outdoor Waterproof LED Strip Lights

Compatible: IP67 and IP68 Silicone-Coated Tape Lights

PCB Width: 8mm (waterproof width 10mm), 10mm (waterproof width 12mm), 12mm (waterproof width 14mm)

 

2 Wire Cable End Connector For Waterproof LED Strip Lights

2 Wire Waterproof LED Strip Light Connector

© 2026 SuperLightingLED. All specifications are subject to change without notice.