| Select Installation: | No (Base), Adhesive Backing (Base), Mounting Brackets |
|---|---|
| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply, LED Strips + Controller |
| Select LED Quantity: | 60 LEDs/m, 144LEDs/m, 96LEDs/m, 30 LEDs/m (Base) |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Color : | RGB + Warm White 3000K (Base), RGB+ Natural white 4000K (Base), RGB+ Daylight white 6000K (Base) |
| Select PCB Color : | White Background (Base), Black Background (Base) |
| Select Waterproof Rating: | IP20 Bare PCB (Base), IP65 Surface Glued Waterproof, Outdoor IP67 (Silicone Sleeve Protection), Submersible IP68 (Silicone Fully Potted) |
| Availability | In Stock |
| Condition | Brand New |
Currently, most well-known digital RGBW LED strips use externally mounted ICs such as UCS2904, TM1814/TM1824/TM1834, SM16704, WS2814, which need to control multiple LEDs per IC chip. Even with built-in ICs, the voltage is mostly around 5 volts, e.g. SK6812/WS2813 5V RGBW strips, with limited operating distance.
Although the SK6812 12V RGBW light strip is individually addressable, it only has one wire to transmit data, for engineering projects, this single wire data transmission method may not be stable enough. Our wide-voltage led strip pixel lights can also realize RGBW LED individually addressable, but its SPI control signal is special and not widely compatible with all control systems.
In order to address these needs, we have launched the CS8812 RGBW series after the WS2815 RGBW series, the supply chain for CS8812 12V individually addressable RGBW LED strips is more stable than WS2815.
These individually addressable RGBW led strips deliver SPI control signals to each LED via DI/DO, BI/BO two data lines (4-pin female and male JST connectors at both sides), each RGBW LED has a built-in microcontroller (CS8812 IC) that receives and parses these signals to independently control its color and brightness. This IC-driven approach allows each RGBW LED to be treated as an individual pixel, enabling highly sophisticated lighting effects.
To reduce the temperature during operation of the high-density 96-light/m and 144-light/m 12V RGBW pixel types, it is advisable to use aluminum led profiles as mounting channels to enhance heat dissipation. 12-volt DC power supply is required.
If you choose the kit, you'll get a SP530E Bluetooth WiFi controller and a UHP-200-12 power supply.
| Item: | SuperLightingLED Individually Addressable RGBW LED Strip |
| LED Chip: | CS8812 + SMD5050 Integrated |
| Drive Type: | RGBWIC driven |
| LED Color: | RGBW3000K, RGBW4000K, RGBW6000K |
| Input Voltage: | DC12V |
| CRI: | 85+ |
| Grey Scale: | 256 |
| PCB Width: |
30LEDs/m, 60LEDs/m, 96LEDs/m - 10mm 0.39" 144LEDs/m - 12mm 0.47" |
| PCB Color: | White, Black |
| Cuttable: |
1-LED |
| LED Quantity: | 30LEDs/m, 60LEDs/m, 96LEDs/m, 144LEDs/m |
| Power: |
30LEDs/m - 7.2w/m, 2.2w/ft, 36w/roll 60LEDs/m - 12w/m, 3.66w/ft, 60w/roll 96LEDs/m - 23w/m, 7w/ft, 115w/roll 144LEDs/m - 34w/m, 10.4w/ft,170w/roll |
| IC Quantity: |
30LEDs/m - 30/m, 150/roll 60LEDs/m - 60/m, 300/roll 96LEDs/m - 96/m, 500/roll 144LEDs/m - 144/m, 720/roll |
|
Length:
|
5m/16.4ft
|
| Lumen: |
30LEDs/m - 72.2lm/w, 520lm/m, 2600lm/roll 60LEDs/m - 88.3lm/w, 1060lm/m, 5300lm/roll 96LEDs/m - 83.3lm/w, 1920lm/m, 9600lm/roll 144LEDs/m - 73.52lm/w, 2500lm/m, 12500lm/roll |
| Waterproof Rating: | Non-waterproof IP20 / Indoor waterproof IP65 / Outdoor Waterproof IP67 IP68 |
| Beam Angle: | 120° |
| Outlet Cable: | 4-pin JST SM female male connectors + 2-pin power wires |
| Solder Joints: | VCC (12V+), DAT 1, DAT 2, GND |
| Installation: | Adhesive backing or brackets |
| Lead Time (excluding shipping): | 7 days |
