Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-16 | ID: 7319

Outdoor DC Low Voltage DMX512 RGBW 12W LED Landscape Floodlight

MODEL: FLDC-DMX512-RGBW12W
Price based on selections below:
$69.98
Select Light Color :DMX512 RGB+White 3000K (Need DMX Console and Self-Programming) (Base), DMX512 RGB+White 6000K (Need DMX Console and Self-Programming) (Base)
Select Operating Voltage:DC12-24V (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The 12W DMX RGBW LED flood light delivers dynamic color changing and clean white illumination for architectural facades, landscaping, and commercial building exteriors. Engineered to operate on an input range of DC 12V to DC 24V and with built-in 350mA constant-current driver, this DMX512 low voltage landscape floodlight fixture prevents voltage drop issues across 15-20pcs long fixture runs, maintaining uniform brightness across entire lighting installations. 

Each RGBW light luminaire supports standard DMX512 control protocols, allowing individual pixel addressing alongside our complete range of outdoor LED floodlight systems. Equipped with an integrated heavy-duty heatsink and sealed to an IP66 ingress protection rating, it provides consistent photometric performance across exterior environments.

Core Technical Attributes

Wide DC12-24V Input

Engineered for wide-voltage DC 12V to DC 24V operation to maintain steady current delivery across interconnected fixtures.

DMX512 Pixel Control

Supports standardized multi-channel DMX addressing for synchronized dynamic lighting sequences.

Dual Color Temperature Choices

Available in addressable RGB plus 3000K warm white or RGB plus 6000K daylight white.

Rugged IP66 Weatherproofing

Sealed die-cast construction prevents dust ingress and withstands low-pressure water jets.

Product Specifications

ParameterDetails
Model NumberFLDC-DMX512-RGBW12W
Housing ConstructionDie-Cast Aluminum with Tempered Glass Lens (93% Transmittance)
Rated Power Consumption12W (Full Power Rated)
Input Operating VoltageDC 12V - DC 24V Constant Voltage
Control ProtocolStandard DMX512 Protocol
Power efficiency90%
Beam Angle120-degree
Emitting Color OptionsRGB+3000K Warm White / RGB+6000K Daylight White
Color Rendering Index (CRI)Ra ≥ 80
Ingress Protection RatingIP66 (Outdoor Wet Locations)
LED Emitter Count1 Integrated High-Power Module
Net Weight600 g (1.32 lbs)
Fixture Volume1800 cm³
Dimensions135mm*120mm*40mm (5.3in*4.7in*1.57in)
Warranty1 Year
Mounting TypeAdjustable Surface Bracket
Lifespan35000 Hours
Working Temperature-30℃ ~ 50℃
Humidity10%-90%RH

Target Application Scenarios

Commercial Building Facades Projects programmable color sweeps and crisp static white grazing against brick, stone, and curtain walling. DMX512 communication enables facade zoning that harmonizes with adjacent exterior landscape lights.
Public Monument and Column Illuminations Highlights architectural columns, commemorative statues, and historic landmarks. The 12W draw allows multiple fixtures on low-voltage DC lines without high power drops.
Botanical and Garden Uplighting Cast saturated RGB hues or clean 3000K tones into tree canopies and perimeter hedging. The sealed IP66 casing defends internal circuits against heavy rains and garden irrigation.

How to Install This Fixture

  1. Select a regulated DC 12V or DC 24V power supply matched to the total wattage of all interconnected floodlight units.
  2. Fasten the heavy-duty bracket using corrosion-resistant stainless steel bolts, verifying the mounting angle matches your illumination target.
  3. Disconnect primary mains power from the DC power supply before handling any secondary wiring connections.
  4. Connect the fixture DC power leads to the power bus, strictly observing positive and negative wire polarities.
  5. Splice the DMX512 signal cable (Data +, Data -, and Ground/Shield) into your DMX controller network.
  6. Set the unique DMX starting address on your control console or addressing tool to assign channel control.
  7. Restore mains power to verify correct RGB color mixing, White channel balance, and DMX address responsiveness.

What's in the Box

  • ✓1 × 12W DMX RGBW LED Flood Light Fixture
  • ✓1 × Integrated Angle-Adjustable Mounting Bracket
  • ✓2 × Pre-attached Waterproof Cable Connector
  • ✓1 × Input Waterproof Cable Lead

Frequently Asked Questions

Q: What power supply is required to run this LED flood light?

A:This fixture operates on a constant voltage DC 12V to DC 24V power supply. It does not connect directly to 120V or 240V mains lines, so an external AC-to-DC driver is required.

Q: How does the wide DC 12V to 24V input benefit long fixture runs?

A:The internal regulator accepts any DC voltage between 12V and 24V, eliminating dimming caused by wire resistance over long exterior cabling distances.

Q: Can this light be submerged inside a fountain or pond?

A:No, an IP66 luminaire is designed for surface-mounted outdoor architectural use and cannot withstand prolonged underwater immersion.

Q: How many DMX channels does each 12W flood light occupy?

A:The fixture operates across 4 DMX channels: Channel 1 for Red, Channel 2 for Green, Channel 3 for Blue, and Channel 4 for the dedicated White emitter.

© 2026 SuperLightingLED. All specifications are subject to change without notice.