| Availability | In Stock |
|---|---|
| Condition | Brand New |
The DA-ML(WT) is an AC-powered WiFi and 2.4GHz RF DALI master controller that functions simultaneously as an active DALI bus power supply. Built for architectural, commercial, and residential installations, this hybrid unit generates standard IEC 62386 DALI control signals directly from Tuya Smart app commands, wireless RF remotes, or standard external AC push switches. It eliminates the need for a separate bus power unit by delivering up to 100mA of power to the DALI loop.
Designed to integrate directly with secondary receivers such as DALI CV dimmers and constant current DALI dimmers, the DA-ML(WT) supports standard DT6 single-channel dimming, DT7 switching, DT8-TC tunable white, DT8-RGB, and DT8-RGBW color control.
Operates simultaneously as an intelligent DALI master interface and a 100mA DALI bus power supply to run small-to-medium loops without extra hardware.
Meets international standard IEC 62386-101, 102, 207, 208, and 209 for cross-brand interoperability with certified DALI control gear.
Configurable via onboard rotary switch to operate standard DT6 single-channel dimming, DT7 on-off switching, DT8-TC tunable white, and DT8-RGB/RGBW multichannel devices.
Connects directly to 2.4GHz WiFi networks for remote scheduling, group management, and smart automation through the Tuya Smart or Smart Life application.
Accepts wireless commands from single-zone or multi-zone RF hand remotes and panels, alongside a physical terminal for momentary AC push dimming.
Features rotary switch settings for target control, enabling unicast address assignment (0-63), group targeting (0-15), or global broadcast operation.
| Parameter | Details |
|---|---|
| Model / SKU | DA-ML(WT) |
| Input Voltage | AC 100-240V, 50/60Hz |
| Input Signal | Tuya WiFi (2.4GHz) + 2.4GHz RF + Push Switch |
| Output Signal | DALI (IEC 62386) |
| DALI Bus Power Output | 16V DC (typ.), 100mA max |
| Supported DALI Types | DT6 (Dimming), DT7 (Switch), DT8-TC, DT8-RGB, DT8-RGBW |
| Addressing Modes | Unicast (0-63), Group (0-15), Broadcast |
| Dimming Range | 0.1% - 100% logarithmic curve |
| RF Control Distance | Up to 30m (barrier-free space) |
| WiFi Frequency | 2.4GHz IEEE 802.11 b/g/n |
| App Support | Tuya Smart / Smart Life |
| Voice Control | Amazon Alexa, Google Assistant via Tuya Cloud |
| Standby Power Consumption | < 1.5W |
| Operating Temperature | -30 deg C to +55 deg C |
| Casing Temperature (Tc max) | +65 deg C |
| Ingress Protection Rating | IP20 (indoor use only) |
| Terminals | Screw terminals, 0.5 - 2.5 mm2 (20-14 AWG) |
| Dimensions | L175 x W45 x H27 mm |
| Net Weight | Approx. 120g |
Q: What is the difference between this unit and other DALI master controllers?
A: Unlike conventional units in our selection of DALI master controllers that require a standalone bus power unit, the DA-ML(WT) integrates both a WiFi/RF master transmitter and a 100mA DALI bus power supply in one chassis.
Q: What LED types is this controller compatible with?
A: Through connected DALI drivers, it controls single-color dimming (DT6), relay switching (DT7), tunable white CCT (DT8-TC), RGB color mixing (DT8-RGB), and four-channel RGBW architectural LED fixtures.
Q: How many DALI drivers can this controller power and control?
A: The built-in bus power supply delivers up to 100mA. Standard DALI driver control ports draw roughly 2mA each, allowing you to connect and command up to 50 standard DALI control gear units directly.
Q: Do I still need one power supply with this controller?
A: An LED power supply (driver) converts line AC voltage to constant low-voltage DC (like 12V or 24V) to power the actual LED strip lights. The DA-ML(WT) only powers the DALI communication line (bus signal); your secondary DALI dimmers still need a dedicated DC LED driver to power the connected LED strip lights.
Q: How to connect led strip lights to power supply when using DALI control?
A: Connect the high-voltage AC mains to your main LED driver, run the driver low-voltage DC output (e.g. 24V) to your DALI dimmer input, connect your LED strip lights to the dimmer output, and attach the two DALI control wires from the DA-ML(WT) to the dimmer DA+/DA- terminals.
Q: How does the push switch dimming terminal function?
A: Connecting a standard momentary push switch allows physical control: a short press toggles lights on or off, while a sustained press ramps light output smoothly up or down between 0% and 100%.