DALI CV Dimmer
10 productsSkyDance DALI CV Dimmers are DALI signal-controlled constant-voltage LED controllers designed to integrate low-voltage DC LED strips and lighting fixtures into DALI lighting control systems. Ideal for residential and commercial lighting projects using low-voltage LED strip lights.
Operating with an external DC12–48V constant-voltage power supply, these controllers receive digital commands from a DALI master through the DALI bus and convert them into PWM output signals to regulate the brightness and lighting effects of connected LED loads.
Available in different channel configurations, they support single-color DIM, CCT, RGB, RGBW, and RGB+CCT LED strips, providing flexible DT6/DT8 DALI control for 1-, 2-, 3-, 4-, and 5-channel constant-voltage LED lighting applications.
DT6 models provide single-channel dimming or multi-channel independent control, while compatible DT8 models support integrated control of tunable white, RGB, RGBW, and RGB+CCT lighting. DALI addressing can be automatically assigned by a compatible DALI master or manually configured through DIP switches or digital display buttons.
12 to 48VDC Constant Voltage DALI DT6 LED Lights Dimmer DA1
DALI Constant Voltage 24V Dimmable LED Driver LPV-150DA-24
Constant Voltage DALI LED Strip Controller Wiring
A complete DALI-controlled constant-voltage LED lighting system requires a compatible DC12–48V constant-voltage power supply, a DALI master controller, a DALI bus power supply, a suitable DALI CV dimmer/controller, and the corresponding low-voltage LED strips or lighting fixtures.

First, connect the AC mains supply to the external constant-voltage power supply, then connect its DC output terminals to the power input of the DALI LED dimmer/controller. The power supply voltage must match the rated voltage of the connected LED strips.
Next, connect the DALI master and DALI dimmer/controller to the same DALI bus, with a compatible DALI bus power supply providing power to the communication line.
Finally, connect the LED strips to the DALI controller's output terminals according to their channel configuration.
Different LED strip types require different output wiring configurations. Single-color DIM strips use one output channel, CCT strips require separate warm-white and cool-white channels, RGB strips use red, green, and blue channels, RGBW strips add a dedicated white channel, and RGB+CCT strips use five independent channels for red, green, blue, warm white, and cool white.
Depending on the DALI controller, these lighting types can operate through DT6 or DT8 modes. Before installation, configure the correct lighting type and DALI addressing according to the selected controller's instructions.
FAQ About DALI CV Dimmers
Technical answers from our bench on selecting, wiring, addressing, and troubleshooting constant-voltage DALI LED dimmers.
A DALI CV dimmer acts as an interface that translates digital commands from a DALI bus into pulse-width modulation (PWM) switching to control constant-voltage LED strip lights. Unlike mains phase-cut dimmers that alter incoming AC line power, a constant-voltage DALI decoder sits on the low-voltage DC side between your auxiliary power supply and the LED tape light. It rapidly switches the negative rail at frequencies from 500 Hz to 8 kHz, modulating perceived brightness from 0% to 100%.
On a DALI CV dimmer, the difference comes down to how many DALI short addresses the controller consumes on your 64-address bus line. DT6 (Device Type 6) allocates one unique DALI address to each physical output channel. Operating an RGBW fixture in DT6 mode requires 4 separate DALI addresses, which quickly consumes bus capacity. DT8 (Device Type 8) consolidates multi-channel color control—such as tunable white (DT8-TC), RGB, or RGBW—into a single DALI address. Multi-channel units like our DA4-M and DA5-L let you switch between DT6 and DT8 modes directly from the onboard interface.
Setting the bus address on a DALI CV dimmer depends on whether you prefer software commissioning or manual field addressing. Compatible DALI masters automatically discover uncommissioned devices on the bus and assign random addresses via standard commissioning software. Alternatively, hardware units like our DA4-L and DA5-L feature a 3-button digital display that allows you to manually force a specific short address from 00 to 63 right at the cabinet. That manual display saves hours on commercial jobsites when you need to replace a single controller without firing up commissioning software.
Exceeding the rated amperage on a DALI CV dimmer will trigger internal thermal protection, causing the output to cycle off, stutter, or shut down completely. A model like the DA4-L delivers up to 5A per channel (120W at 24V). If your lighting load pulls 8A on a channel, you will overheat the onboard MOSFETs. Rather than overloading the controller, connect the channel output into downstream LED strip amplifiers paired with supplemental power supplies, or switch to our single-channel DA1 unit, which handles up to 15A continuous load on a single feed.
You can run a DALI CV dimmer outdoors only if the housing carries an appropriate ingress rating. Standard models are IP20 and belong inside an electrical enclosure or indoor dry ceiling cavity. For landscape, architectural facade, or wet cove installations, use an IP67 sealed unit such as our DA4-WPS. It delivers 5A per channel at 12V/24V and 3A per channel at 36V/48V under wet weather conditions.
The maximum length of LED strip lights a DALI CV dimmer can drive depends on the strip wattage per meter and supply voltage. A 4-channel dimmer like the DA4-M delivers 5A per channel, yielding 120W per channel at 24V (480W total across all 4 channels). If you run an accent LED tape light drawing 9.6 W/m, each channel powers up to 12.5 m of tape, allowing 50 m total across the controller. On 12V, however, that same 5A output yields only 60W per channel, cutting your maximum run length down to 6.2 m per channel.