| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply, LED Strips + Controller |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Color : | RGB + Daylight White 6000K (Base), RGB + Warm White 3000K (Base), RGB+ Natural white 4000K (Base) |
| Select PCB Color : | White Background (Base), Black Background (Base) |
| Select PCB Width: | 12mm (0.47in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Outdoor Silicone Tube IP67 - With Brackets, Underwater IP68 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
This DC12V individually addressable led strip light is controlled by SK6812 IC to display RGBW color chasing led light color, 60LEDs per meter, there are 300 pixels on one 5m/16ft led strip, each LED is individually addressable, you can set it to different color and brightness.
This 12V dream color RGBW SK6812 led strip is less voltage drop than 5V addressable RGBW led strip, it can run longer.
Use RGBW 4 in 1 5050 LEDs, available in more color options and color combinations. Matching the SPI controller can display a variety of color chasing effects. You can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers/microprocessors to control the SK6812 led strip light.
Similar to WS2812B LED strip, the SK2812 led strip has 3 wires for sending data (one V+ pin, one GND pin, and one data pin). The direction of the arrow indicates the data flow direction.
This addressable led strip comes with a 3-pin JST SM connector on each end. Every LEDs segment can be cut, you can also connect these SK6812 RGBW led strips together to make them longer. To power this individually addressable led strip, you need a 12V power supply.
Input Voltage: DC12V
IC Type: SK6812 IC
LED Chip Model: SMD5050 RGBW
Color Temp(K): RGB+3000K / RGB+6000K
Colors: Full color RGBW
Grey Scale: 256
FPC Color: Black
Q'ty of LED: 60LEDs/Meter; 300LEDs/Roll
Q'ty of IC: 60 pixels /Meter
Power: 28watt/meter, 140watt/roll
Control Type: Individually addressable
Cuttable: Single LED cuttable
Dimensions: L500cm(196.85 in ) x W1.2cm(0.41 in ) x H0.25cm(0.1 in )
Protection Rate: Non-waterproof IP20 / Indoor Waterproof IP65 / Waterproof IP67 IP68
Average Life (hrs): 50000Hours+
Product List
1* 5m/16.4Ft RGBW addressable LED strip light
If you choose the LED controller in the kit, we will send you CONFULL-SP107E
If you choose the LED power supply in the kit, we will send you LRS-200-12 + AC Plug
Waterproof Level Description
IP20 Non-waterproof (The PCB [Printed Circuit Board] surface of the bare, with a self-adhesive back, For Indoor);
IP67 Waterproof (Silicon sleeve waterproof, PCB is encapsulated with silicon tube, with a plastic fastener, better waterproof, For Outdoor);
Connection Diagram: How to wire the addressable RGB LED strip?
