Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 6628

DC12V Ultra High Density 5050 DMX RGB Led Rope Light

MODEL: DMXRGB-SM18512SK-5050X120
Price based on selections below:
$109.98
Select Kit:LED Strips (Base), LED Strips + Controller + Power Supply
Select LED Quantity:120 LEDs/m (40 ICs/m) (Base)
Select Length:16.4ft (5 meters) (Base)
Select PCB Width:20mm (0.79in) (Base)
Select Waterproof Rating:Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Densest 12V DMX RGB Strip Light. This 12V DMX RGB Rope Light utilizes a high-density 120/m LED arrangement that provides a more even and bright lighting effect. Due to its special configuration of SMD5050 LEDs, DMX512 IC chips, and other electrical components, the dmx rgb led strip's high-density design required an increase in PCB width to accommodate all the components, so this dmx led rgb strip's 120 LEDs/m are delicately laid out on a 20mm wide flexible circuit board.

12V voltage input for delicate, medium-length lighting applications, responds directly to DMX signals for precise color changes and light effects, without the need for any DMX decoder. One DMX IC controls 3 x 5050 LEDs, very detailed pixel distance 25mm/1in. The subtle pixel spacing allows color changes and dynamic effects to be more accurately rendered on this DMX RGB strip, helping to achieve more complex and artistic lighting effects such as high-quality gradients, color changes and gobo displays. Small dmx 512 rgb pixel spacing provides more detailed control over dimming and effects, and allows designers to create more creative and complex lighting arrangements.

The Black TM512AD RGB+W version is out of stock now and requires 500 meters to produce (custom fee will be applied if your quantity is less than 500m). 

 

Product Features

120 lights per meter with super dense LED arrangement, 20mm wide PCB, 12V voltage input

DMX signal direct control, input and output with 5-wire JST connector (12V+, GND, A/signal, B/backup signal, P/address)

25mm/1inch precise pixel array ensures that every lighting detail is accurately rendered

Brings very detailed color performance to neon light applications that require wide lumens

Compatible with professional DMX master controllers and smart, easy-to-use DMX controllers such as the SPIB5 Bluetooth+RF smart controller in the kit (RF remotes need purchase separately)

 

Product Specifications

LED System:  Addressable LED Strip Lighting Systems
Brand:  SuperLightingLED
Strip Light Type:  DC12V Ultra High Density 5050 DMX RGB Led Rope Light
LED Chip:  SMD5050 + 10-pin SK18512SK IC
Drivern:  DMX controller
LED Color:  Addressable RGB (DMX directly control)
Input Voltage:  DC12V
Power: 
15W/m, 4.6W/ft, 75W/roll
Strip Length:  5m/16.4ft
PCB Width: 
20mm/0.78in
LED Quantity:  120 LEDs/m
IC Quantity: 
40 ICs/m (1 IC controls 3 LED lights), 200/roll
Cut Unit: 
25mm/1in, 3 LEDs can be cut
Waterproof Rating:  Non-waterproof IP20, Indoor Waterproof IP65, Outdoor Waterproof IP67 IP68
Installation:  3M adhesive backing
Solder Joints:  12V+, Pi/Po (DMX addresses), A (DMX signal 1), B (DMX signal 2), GND
Outlet Cable:  JST SM female male 5-pin connectors + 2-pin power connectors
Lead Time (excluding shipping):  3-4 workdays
Working Temperature:  -20℃ ~ +45℃
Lifespan: 50,000+ hours

 

Application

Combining exquisite color performance with high brightness output, this RGB rope light DMX is particularly suitable for neon applications with wide lumen requirements, and is capable of presenting delicate color transitions and dynamic effects in a wide range of illumination.

Note: When selecting a neon housing for this dmx strip, please choose IP20 type as the neon tubing will provide external protection for the IP20 strip, so no additional strip protection rating is required. If it is a neon cover and used outdoors please choose IP67 light strip.

 

Product Package

1 x 5m ultra-high density DMX color changing RGB led strip

1 x 5-pin JST connector cable wire

1 x 2-pin JST connector cable wire

1 x SPIB5 controller (optional)

1 x LRS-100-12 driver with AC plug (optional)

DC12V Ultra High Density DMX RGB Led Light Control

© 2026 SuperLightingLED. All specifications are subject to change without notice.