Single Color LED Strip Light Kits

Think about the feeling of the room. Warm White (2700K-3000K) is cozy and yellow-ish, like a classic incandescent bulb, great for living rooms or bedrooms. Natural White (4000K-4500K) is a neutral, clean light, perfect for kitchen tasks and bathrooms where you need to see colors accurately. Cool White (5000K-6500K) is crisp and slightly blue, like daylight, often used in garages, workshops, or for very modern designs. You can read more in our guide to light colors.

It's one of the easier DIY projects because these kits are plug-and-play. You don't need to be an electrician. The main job is planning where the wires will run to be hidden. You'll stick the strip up, plug the controller into the strip, and plug the power supply into the controller and the wall. The hardest part is usually just drilling a small hole or two between cabinets to pass the wire for a clean look.

Absolutely. That's what they're designed for. Look for the cut marks, which are usually a little scissor icon right across a set of copper pads. You have to cut on that line. If you need to rejoin pieces or go around a corner, you can use solderless 2-pin connectors to link them back up without any special tools.

You can't just plug one kit into the end of another. The power supply in each kit is specifically sized for one 16.4ft strip. Trying to power two strips from one small power supply will overload it, causing it to overheat and fail, and your lights will be very dim. To do a longer run, you need a single, larger power supply and must wire both strips back to it in parallel.

The best dimmer switch for these dimmable LED kits is always the one that's included. Whether it's a small remote, a touch sensor, or a knob, it has been tested to work perfectly with the power supply and the LED strip. Using a third-party single color dimmer can work, but it can also introduce problems like flickering if the PWM frequencies don't align, so it's best to stick with the matched set.

Yes, we build custom single color LED strip kits like that every day. A huge amount of what we ship is built to a customer's drawing. Just send us a sketch—even a photo of a hand-drawn diagram is fine—with the lengths you need for each shelf and the wire lengths between them. An engineer here will spec out the right components, create a wiring diagram, and send you a parts list with a quote, usually the same business day. There's no fee or obligation for the design service.