LED Fiber Optic Cable

21 products

Fiber optic light cable is the main body in LED fiber optic lighting systems. We provide fiber optic light strands with different diameters (0.75mm-14mm) and spool lengths (1-100m) to meet your needs. Buy these end glow, full body glow, and side glow fiber optics cables for your home decorative lighting and outdoor ambient lighting. 

When installing LED fiber optic cable lighting, make sure that the installation environment is clean and tidy. If dust enters the end of the LED fiber optic or the fiber cable is covered with dust, it will darken the light transmission.

Note: A complete LED fiber optic lighting system should contain fiber optic led strips and fiber optic light sources (sold separately). 

LED Fiber Optic Lights Guide

-73%
0.75/1.0mm PMMA Plastic Fiber Optic Cable End Glow
Quick View

0.75/1.0mm PMMA Plastic Fiber Optic Cable End Glow

FIBERCABLE02
$39.99 $10.9873% off
Options
-75%
1.5mm-8mm Side Glow Fiber Optic Cable Spool 5m/16.4ft
Quick View

1.5mm-8mm Side Glow Fiber Optic Cable Spool 5m/16.4ft

FIBERCABLE09
$19.99 $4.9975% off
Options
-6%
PMMA LED 8mm Side Glow Fiber Optic Cable
Quick View

PMMA LED 8mm Side Glow Fiber Optic Cable

FOC-8MM-10M
$66.98 $62.986% off
Options
-70%
End Glow Fiber Optic Cable For Starlight Ceiling
Quick View

End Glow Fiber Optic Cable For Starlight Ceiling

FIBERCABLE03
$29.98 $8.9870% off
Options

FAQ About LED Fiber Optic Cable

Direct engineering answers on sizing, light loss, cutting, and installing solid-core and stranded optical fibers.

A fiber optic light cable carries photons rather than electrical current using the optical principle of total internal reflection. Light enters the polished face of the high-purity PMMA (polymethyl methacrylate) acrylic core, hits the fluoropolymer cladding at an angle shallower than the critical boundary angle, and bounces repeatedly down the run until escaping at the cut tip or through micro-textured side walls. Because no copper conductors or voltages travel along the run, you can route light fiber optic strands safely through wet niches, display cases, and swimming pool perimeters where line voltage is prohibited.

Choose end glow light fiber optic strands when you need pinpoint spots of light at the terminal ends, such as star ceilings, sauna ceilings, and miniature cabinet downlights. Choose side-emitting or solid-core side glow cables when you need a continuous neon-like perimeter line for floor borders, steps, or vehicle contours. We offer 12 distinct diameters from 1 mm up to 14 mm, letting you balance beam punch at the tip against uniform edge brightness along the jacket.

Yes, solid-core PMMA fiber optic light cable carries no electrical current and will not short-circuit, corrode, or present shock hazards when submerged in water or buried in landscape soil. However, you should specify black-PVC sheathed cable for outdoor burial to protect the optical cladding from mechanical abrasion, burrowing pests, and direct ultraviolet sun exposure. 

Mount large 6 mm to 14 mm led light fiber runs using clear polycarbonate mounting tracks, UV-stable silicone clips, or neutral-cure RTV silicone adhesive spaced every 250 mm to 300 mm. Never use narrow metal zip ties, mechanical cable staples, or solvent-based adhesives containing toluene or acetone; crushing the cladding pinches the light path, while aggressive solvents will chemically dissolve the PMMA core within hours. For flush floor and wall details, press the fiber gently into rigid channels without pinching the outer diameter.