What is GS8206 addressable LED strip light?
GS8206 is a 3-channel constant current LED driver IC with breakpoint resume transmission and internal control patterns, including three constant-current output terminals, 256-level grayscale adjustment, and maximum support for DC24V input voltage. The chip has a built-in 12bits GAMMA correction module, the maximum PWM refresh frequency is up to 8kHz, and it provides an output channel current misalignment processing method that can reduce electromagnetic interference and power supply clutter.
The chip adopts the return-to-zero code signal transmission method, which can control the output current channel by channel and infinitely cascade; dual-channel data transmission, single LED damage does not affect the normal lighting of other LEDs. The chip has built-in power-on protection and power-down protection functions to enhance the service life of the chip, and has the power-on automatic test function. D01/D02 terminal receives Raspberrypi/Arduino UNO development board or SPI LED controller signal data, and outputs 16 million dynamic color chasing effects. When there is no signal input, GS8206 will display the built-in program.
DC12/24V GS8206 LED strip, external IC, integrated RGB LED chip and control circuit in the SMD5050 component, a single IC can control 3/6 LEDs, DC24V 10m/32.8Ft without voltage drop, the length of the LED strip can be customized; the exterior is made of the epoxy cover layer, silicone sleeve, waterproof plastic irrigation, achieve IP65/67/68 waterproof, the LED strip light can also work with LED neon tube with good heat dissipation, can achieve IP67 and above waterproof rating; the back of LED strip light uses 3M tape, easy to install.