High Voltage LED Lights Parts

Display all products in this category 1 to 14 (of 14 products)

(0)
Model:HV-ACCESSORIE-2PIN
- AWG:18/20 optional
- Shell Color:White/Black
- Legnth:3.28ft/1m
- Waterproof Rating:IP65
Various Options In Stock
$1.20The waterproof power cable is made of imported high-strength plastic, which has good flexibility and is not easy to break, and uses PVC protective sleeves inside and outside, with double protection of the core, and stable transmission. The power cord is suitable for outdoor monochromatic LED light strip , but it cannot be prevented from underwater. When the length of the single color led light...

(0)
Model:RGB-ACCESSORIE-4PIN
- AWG:20
- Length:3.28ft/1m
- Applicable: RGB LED light strip
- Material: oxygen-free tinned copper wire
Various Options In Stock
$2.19The power wire cable uses oxygen-free tinned copper wire, low resistance, long-lasting and stable conductivity. Resistance directly affects the point's consumption during transmission, and the smaller the resistance, the better. It is suitable for when the RGB LED light strip has a voltage drop, the power cord can be used to supply power separately at both ends of the flexible LED light strip...

(0)
Model:HV-ACCESSORIE-002
- Applicable Width: 10mm
- Pins: 2/3/4-Pin
Various Options In Stock
$0.89High Voltage 2/3/4-Pin LED Tape Lights Mini Quick Middle-Connector For Casing and casing Cutting Reconnection

(0)
Model:LED-ACCESSORIES-009
- Applicable Width: 14mm
- Packing: 10Pcs/Pack
Various Options In Stock
$0.99This is an accessory to use with the high voltage strip light - 120V/220V. Used to attach the LED strip Light to under cabinets or set the lights in place and not move around. They are made or hard plastic and thin enough to be strategically placed in the gap between each LED to not block any light. FEATURING: Made out hard plastic and perforated holes for screws or nails (NOT INCLUDED)...

(0)
Model:HV-ACCESSORIE-003
- Packing: 1 Piece
- Pins: 2-Pin / 4-Pin
- Application: High voltage led strip lights
Various Options In Stock
$0.59High voltage led strip lights connect controller 4pin fast Bare connectors

(0)
Model:HV-ACCESSORIE-004
- Packing: 1 Piece
- Applicable Width: 10 / 15mm
- Materia: Silicone
Various Options In Stock
$0.29High voltage led strip lights cutting the trailing end waterproof plug connector

(0)
Model:HV-ACCESSORIE-005
- Packing: 1 Piece
- Length: 0.33Ft/10Ft
- Applicable Width: 10mm
- Applicable Color: 5050 RGB
Various Options In Stock
$1.29High voltage RGB color changing 4pin single fast connector for 5050 RGB high voltage led strip ligths

(0)
Model:HV-SINGLEEND-10FT
- Packing: 1 Piece
- Length: 10ft/3m
- Applicable Width: 10mm
- Pins: 4-pin
Various Options In Stock
$8.49High Voltage LED Strip Light 10ft/3m Extension Cord Connector 4-pin Bare Wire to LED Strips

(0)
Model:HV-ACCESSORIE-006
- Packing: 1 Piece
- Length: 0.33Ft/10Ft
- Applicable Color: 5050 RGB High Voltage
- Pins: 2PIN/4PIN
Various Options In Stock
$1.79High voltage RGB color changing 4pin double fast connector for 5050 RGB high voltage led strip ligths

(0)
Model:HV-DUALEND-10FT
- Packing: 1 Piece
- Applicable Width: 10mm
- Length: 10ft/3-meter
- Application: High Voltage LED Strip Light
Various Options In Stock
$8.99High Voltage LED Strip Light Connector 4-pin End to End 10ft/3-meter Extension cord

(0)
Model:HV-ACCESSORIE-009
- Packing: 1 Piece
- Applicable Color: RGB
- Material: PVC and Metal
- Application: High Voltage RGB
Various Options In Stock
$2.20The "L" Connector help with installation of the LED strip where a split from 1:2 is needed or where bottom/top runs to left and right on the strip is needed. Every easy to install, No Welding required. Just a quick insert of the strip with a pin to strip and You have yourself a "T" split for LED strip installation. Easy to connect 3 x 110V/220V high voltage strips with...

(0)
Model:HV-ACCESSORIE-007
- Packing: 1 Piece
- Material: PVC and Metal
- Application: High Voltage RGB
- Pins: 4-pin
Various Options In Stock
$2.40The "T" Connector help with installation of the LED strip where a split from 1:2 is needed or where bottom/top runs to left and right on strip is needed. Every easy to install, No Welding required. Just a quick insert of the strip with pin to strip and You have yourself a "T" split for LED strip installation. Easy to connect 3 x 110V/220V high voltage strips with...

(0)
Model:HV-ACCESSORIE-008
- Pins: 2-Pins
- Packing: 1 Piece
- Material: PVC and Metal
- Application: High Voltage led strip lights
Various Options In Stock
$2.29The "L" Connector help with installation of the LED strip where a split from 1:2 is needed or where bottom/top runs to left and right on the strip is needed. Every easy to install, No Welding required. Just a quick insert of the strip with a pin to strip and You have yourself a "L" split for LED strip installation. Easy to connect 3 x 110V/220V high voltage strips with...

(0)
Model:HV-ACCESSORIE-010
- Packing: 1 Piece
- Material: PVC and Metal
- Application: high voltage LED strips
- Packing: 1 Piece
Various Options In Stock
$2.39The "T" Connector help with installation of the LED strip where a split from 1:2 is needed or where bottom/top runs to left and right on the strip is needed. Very easy to install, No Welding required. Just a quick insert of the strip with a pin to strip and You have yourself a "T" split for LED strip installation. Easy to connect 3 x 110V/220V high voltage strips with provided...
Display all products in this category 1 to 14 (of 14 products)
© 2010-2022 SuperLightingLED.Inc. All Rights Reserved.
Site Map
top