LED tape DMX decoder acts as a bridge between the DMX512 controller masters and the connecting LED strip lights. It converts the DMX signal from the DMX masters into signal that the regular LED strip lightings are able to respond to, realizing precise lighting control. Most decoders offer 3 or more channels to accommodate a wider range of LED strip types such as RGB, RGBW or RGBCCT LED strips.
The LED decoder DMX is compatible with DMX512-A, DMX512 (2008) and RDM V1.0 protocols. The RDM protocol enables the master DMX console to remotely detect, display and set DMX RDM decoder information through a two-way communication function. Our constant voltage DMX decoder always operates in the low voltage range of 12V or 24V, some can go up to 36V. Therefore, the DMX decoders are compatible with 12-36V power supply.
Besides, the LED DMX512 decoder features standard DMX512 interface and numeric digital display, supporting user to set DMX address. In conclusion, DMX decoder supports users to flexibly control multiple LED fixtures through a standardized DMX lighting control system to achieve complex lighting control.
(0)
