Skydance sensor switch series products include PIR body sensor switch, hand sweep sensor switch and gate control sensor switch. PCBA board mode, low cost, easy to install, generally built in the lamp tube, installed in the exhibition case, wardrobe and other occasions, used to control 5 meters of low voltage single color LED strip.
SkyDance Control System
Sponsors
Sponsors
Sensor Switch
(0)Model:ES32
PIR Sensor LED Stair Lights Controller ES32 With Stair Lighting Kit
- Input voltage: 5-24VDC
- Output voltage: 32*(5-24)VDC
- Output Power: 32*(5-24)W
- OT: -30℃~+55℃
- CT: Tc:+85℃
- IP rating: IP20
This led product is a PIR sensor stair light controller for DIY stairway lighting, suitable for stair lights indoor decor. The motion sensor stair lights can automatically get the human body induction, and then automatically turn on the stair lighting, after a few seconds, the staircase lighting will disappear, it is an intelligent stair lighting system. This ES32 controller for stairway lights...
(0)Model:E1-B
E1-B DC12-24V Hand Sweep Sensor Switch For Low Voltage LED Strip
- Input voltage: DC12-24V
- Output Voltage:DC12-24V
- Detective Distant:≤8cm
- Detective Angle:15-30
Features ● Hand sweep sensor switch, connected directly to the low voltage LED strip. ● When hand sweep, the strip turn on gradually. When hand sweep again, the strip turn off gradually. ● Max 4A output current, max output power 96W@24V. ● Generally installed in the aluminum lamp strip housing. ● 3M paste in the bottom of the PCBA make easy installation and security. ● Low cost and...
(0)Model:E1-D
E1-D DC12-24V Door Sensor Switch For LED Strip Light
- Input voltage: DC12-24V
- Output Voltage:DC12-24V
- Detective Distant:≤10cm
- Detective Angle:15-30
Features ● Door sensor switch, connected directly to the low voltage LED strip. ● When the door open, or no obstacle ahead, the strip turn on gradually. When the door close, or obstacle ahead, the strip turn off gradually. ● Max 4A output current, max output power 96W@24V. ● Generally installed in the aluminum lamp strip housing. ● 3M paste in the bottom of the PCBA make easy...
(0)Model:E1-R
E1-R DC12-24V PIR Motion Sensor Switch
- Input voltage: DC12-24V
- Output Voltage:DC12-24V
- Detective Distant:≤3cm
- Detective Angle:120
Features ● PIR motion sensor switch, connected directly to the low voltage LED strip. ● When people or objects enter the sensitive field, the strip turn on. When these exit the sensitive field, the strip turn off after 30 seconds. ● Max 3A output current, max output power 72W@24V. ● Generally installed in the aluminum lamp strip housing. ● 3M paste in the bottom of the PCBA make easy...
