LED Cabinet Lighting Control Series

6 products

The SkyDance LED Cabinet Lighting Control Series is specifically designed for sensor-activated lighting in cabinets, shelves, closets, and other furniture applications. These compact control modules provide up to six synchronized low-voltage output ports for connecting multiple LED strip lighting runs, and support a combined maximum load of up to 60W across all outputs. Depending on the model, they support either single-color LED strips or tunable white CCT LED strips with 2-wire connections.

Flexible Sensor Options for Different Cabinet Lighting Needs

These CV-Series controllers are compatible with a variety of sensor heads (buy separately), allowing you to choose the detection method that best suits your installation. Available options include PIR motion sensors, hand-sweep sensors, door contact sensors, touch sensors, and concealed wood touch sensors. 

Whether you want the light strips to turn on when a cabinet door opens, when someone approaches, or when you wave your hand near the sensor, you can select a suitable sensor head for convenient hands-free or touch-activated lighting control.

All connected shelf lighting outputs can respond together to the same sensor trigger, making it easy to illuminate multiple shelves or cabinet sections simultaneously.

RF Remote and Smart Control Options

In addition to sensor-based operation, selected models offer RF wireless remote control, Wi-Fi or Zigbee smart control, allowing you to adjust the lights using a compatible SkyDance RF dimmable handheld remote, dimmable in-wall panel remote for single color lights, and CCT handheld remote, CCT panel remote for tunable white lights, or through Tuya-compatible app control and voice control to integrate cabinet lighting into your smart home routine.

FAQ About LED Cabinet Lighting Control Series

Clear answers from our technical desk on wiring, power calculations, sensor pairing, and multi-shelf control for cabinet installations.

A multi-shelf cabinet with led lights turns on seamlessly when you feed all shelf leads into a centralized 6-channel junction box like the CV0 or CV1. Each output port receives identical voltage and dimming signals in parallel. That means your under-shelf runs, vertical face accents, and interior cubbies dim and switch at the exact same moment from one trigger source.

Our 6-channel cabinet led lighting units accept low-voltage sensor heads including the ER PIR motion sensor, EB hand sweep sensor, ED door contact switch, EC touch sensor, and EW concealed wood touch sensor. These sensor heads connect straight to the controller input port using standard low-voltage harnesses. The controller reads the sensor trigger and applies the on, off, or smooth dimming action across all connected shelf outputs.

To size your power supply for cabinet led lights, add the rated wattage of every shelf run together and add a 20% safety margin. If you have six cabinet shelves each running 0.8 m of 9.6 W/m LED strip, your raw load is 46.08 W (6 × 0.8 m × 9.6 W/m). Adding a 20% headroom margin requires at least 55.3 W, making a 60W constant voltage driver like our PBL-60-12 or PBL-60-24 the right match.

The cleanest location for in cabinet lighting control gear is atop the upper cabinetry behind the crown moulding or inside an adjacent pantry access panel. Placing the driver above the millwork keeps line-voltage AC out of reach while letting you drop low-voltage class 2 DC cabling down cabinet service chases. For step-by-step wire routing methods, check our above-cabinet lighting guide.

Controlling dual-white tape requires a 2-channel CCT controller such as the 12V CV2, paired with tunable white strips and a 3-wire harness (common positive, warm white negative, and cool white negative). The CV2 controller balances current between the 2700K and 6500K channels across its six synchronized output ports, letting you adjust color temperature and brightness simultaneously using a matched CCT RF remote.

Connecting the CV1(WT) hub to your 2.4 GHz home network allows Alexa and Google Assistant to control cabinet lighting by voice for on/off toggling and brightness adjustment. The Tuya chip inside the CV1(WT) bridges the local PWM dimming circuit to cloud routines. If your home internet drops, the CV1(WT) still responds instantly to paired 2.4G RF handheld remotes and direct sensor inputs.

Single-color tape light is the standard LED for cabinet light installations running off the CV1, which provides six dimmable 12V outputs controlled together. With our catalog stocking 6 live models in this specialized category—three of which are dedicated 12V units—this range deliberately focuses on low-voltage cabinet cabinetry where 12V represents 50% of the lineup compared to 0% in general sensor switches.

Yes, you can wire multiple ED door contact switches to coordinate a cabinet lighting led system across a multi-door wardrobe or pantry credenza. When using normally-closed door switches wired in parallel, opening any single cabinet door triggers the controller to illuminate all six connected shelves immediately. The lights stay on until the last open door is pushed completely shut.