LT-BUS Control System

RF+DMX512 Wall Panels are wireless DMX lighting control interfaces designed for integration into the compatible L-BUS control system. They combine convenient 2.4GHz RF wireless control with DMX512 signal output, allowing users to control compatible DMX decoders or drivers and connected LED strip lights from a wall-mounted touch panel. 

Depending on the DMX decoder and driver configuration, this system can support single-color dimming, tunable white (CCT), RGB, RGBW, and RGBCCT lighting. This setup is ideal for residential, commercial, and architectural lighting projects that require centralized DMX control.

These LTECH L-BUS RF DMX512 wall panels are powered by 100–240V AC and designed for installation in a compatible 86 × 86mm wall box. While the panel communicates with compatible L-BUS devices wirelessly via 2.4GHz RF, such as the WiFi master, F Series and Q Series handheld remotes, its DMX512 output must be hardwired to the DMX signal input of a compatible DMX decoder or DMX-enabled LED driver. The connected decoder or driver then controls the LED lighting according to the received DMX commands.

Ensure that the DMX signal wiring, terminal connections, and installation comply with the specific product's wiring diagram and applicable electrical codes.

LTECH L-BUS RF touch panels combine intuitive wall-mounted touch control with 2.4GHz RF wireless connectivity for system control. With different models supporting different output types, these panels can control compatible low-voltage LED strip lights directly or operate with suitable dimmable 0-10V LED drivers for a wider range of lighting applications.

Choose the panel according to your LED lighting type and control requirements:

LTECH EBOX wireless modules are part of the L-BUS lighting control system, designed to connect compatible 2.4GHz RF wireless controls with lighting equipment that uses different control interfaces. By converting wireless RF commands into DMX512, 0–10V, or TRIAC signals, the EBOX series helps integrate compatible lighting loads into a coordinated wireless lighting system without requiring a separate wired control connection from each wall panel to the control module.

RF-to-DMX512 Module — Receive compatible L-BUS RF commands and output DMX512 signals for compatible DMX decoders and DMX-enabled LED drivers. Can be wirelessly paired with compatible EX Series RF+DMX512 wall panels and F Series or Q Series RF remotes, allowing users to control DMX lighting from wall-mounted or handheld controls. A wired DMX connection is still required between the EBOX module and the downstream DMX equipment.

RF-to-0–10V Module — Converts compatible L-BUS RF commands into a 0–10V control signal for compatible 0–10V dimmable CV or CC LED drivers. It can be paired with single-zone EX1 panels, multi-zone EX5 panels, and F Series or Q Series RF remotes for wireless control.

RF-to-TRIAC Module — Receives compatible L-BUS RF commands and provides wireless control for supported TRIAC dimmable lighting systems. It can wirelessly work with single-zone EX1S or multi-zone EX5 panels and F Series or Q Series handheld remotes.

Before purchasing, confirm the module's input power requirements, output interface, supported RF devices, and compatibility with the connected driver or lighting load. 

LTECH F Series and Q Series RF handheld remotes are wireless control accessories designed for compatible devices within the LTECH L-BUS lighting control system. Using compatible 2.4GHz RF communication, these remotes provide convenient handheld control of supported E Series and EX Series wall panels, wireless LED receivers, and EBOX wireless signal converter modules.

Depending on the remote model and the connected device, supported functions include brightness adjustment, tunable white (CCT) control, RGB and RGBW color selection, and multi-zone lighting control.