AC Triac Dimmer
19 productsSkyDance AC Triac/ELV Dimmer Series consists of compact phase-cut dimming modules and multifunctional AC lighting controllers designed for leading-edge (forward-phase) and trailing-edge (reverse-phase) dimming of compatible AC-powered lighting loads.
Unlike Triac/ELV wall dimmer panels with built-in rotary knobs or touch controls, these modules rely on external control signals or devices to operate, such as Push-Dim switches, compatible 2.4GHz RF handheld remotes or wireless panel remotes, Wi-Fi, Bluetooth, or Zigbee smart control systems, and, on selected models, DMX512, DALI, or 0/1-10V control systems.
Some models also feature built-in lighting effects and preset modes, allowing users to create different lighting atmospheres and dynamic visual effects without requiring an additional lighting controller.
Whether you need a compact Triac/ELV dimming module for concealed installation, an RF or smart wireless controller, or a professional interface for integrating phase-cut dimmable lighting into DMX512, DALI, or 0/1-10V systems, SuperLightingLED SkyDance AC Triac/ELV Dimmers provide versatile solutions for residential, commercial, architectural, and centralized lighting control projects.
Zigbee and RF Din Rail LED TRAIC Dimmer Switch S1-F(WZ)
RF AC Triac Dimming Set S1-B+R11: Wall Mounted LED Light Control
Push-Dim AC Triac/ELV Dimming Module Wiring
Push-Dim AC Triac/ELV dimming modules can be connected to an external momentary push-button switch for manual ON/OFF and brightness adjustment.
The AC power supply and compatible dimmable lighting load are connected according to the module's wiring diagram, while the push-button switch is connected to the designated Push-Dim terminals.

Users can typically short-press the switch to turn the light on or off and long-press it to adjust brightness. This provides convenient wall-switch control without requiring a dedicated Triac dimmer panel.
Smart Home AC Triac/ELV Dimmable Lighting System Wiring
Wi-Fi, Bluetooth, and Zigbee AC Triac/ELV dimming modules can be integrated into smart home systems for app-based and wireless lighting control.
Connect the AC input and compatible phase-cut dimmable lighting load to the corresponding terminals, then pair the module with its supported smart home platform or gateway according to the product instructions.

Depending on the model, users can control brightness through a smartphone app, voice assistant, or smart home automation routines. Some models also support RF remote control, providing additional flexibility for both wireless and smart home operation.
FAQ About AC Triac Dimmer
Direct technical answers on line-voltage phase-cut dimming, wiring limits, protocol matching, and load calculations from our engineering desk.
An AC Triac dimmer is a solid-state ac voltage dimmer that adjusts light levels by chopping out portions of the alternating current sine wave. In traditional incandescent lighting this phase cutting simply reduces RMS voltage to dim the filament, while in solid-state lighting it provides a chopped AC waveform that a triac dimmable driver interprets to scale its DC output. Our Skydance units handle 100 to 240VAC line input and provide 256 steps of smooth 0 to 100% dimming without visible stepping.
Leading-edge dimming cuts the front half of each AC half-cycle right after the zero-crossing, whereas trailing-edge dimming cuts the back half before the voltage drops to zero. Inductive loads like magnetic transformers run best on leading-edge, but modern electronic LED power supplies and mains-voltage LED lamps strongly prefer trailing-edge mode because it eliminates high voltage spikes and line buzz. Most units in our AC Triac dimmer range let you toggle between leading edge and trailing edge via dip switch or digital display buttons.
No, an AC Triac dimmer outputs high-voltage 100-240VAC and will immediately destroy a 12V or 24V LED strip if wired directly to it. The AC dimmer must be wired upstream between your mains electrical supply and a dedicated phase-cut power supply, such as our triac dimmable drivers. The dimmer controls the driver on the mains side, and the driver delivers smoothed, pulse-width-modulated DC power down to your low-voltage tape.
In-line triac dimmers are compact modules built to tuck inside junction boxes, ceiling voids, or DIN rail cabinets, controlled entirely by wireless RF, mobile apps, or external push switches. In contrast, dedicated triac panel dimmers combine the phase-cut dimming circuit and physical rotary glass faceplate into a single permanent wall-box unit. We list 31 live models in this AC Triac dimmer category for modular concealment, whereas our panel dimmers serve rooms needing direct physical wall control.
Calculate maximum LED load by multiplying your AC line voltage by the dimmer's rated amperage, then applying a 50% derating factor to handle capacitive inrush current. While a 1.5A module technically switches 180W resistive on 120V mains or 360W on 240V mains, LED drivers draw brief current spikes at turn-on that will trip internal thermal protection if fully loaded. For a 1.5A rated AC Triac dimmer, keep your total connected LED driver load under 90W on 120V lines or under 180W on 230V lines.
Yes, models like the S1-B, TR1, and S1-L accept simultaneous inputs from a standard momentary AC push switch and multiple 2.4GHz wireless remotes. A short press on the mechanical wall switch toggles power on or off, while a continuous hold ramps the brightness up or down. At the same time, any paired hand-held RF remote or wireless wall panel can adjust brightness without desynchronizing the dimmer's internal 256-level memory.
DALI and DMX AC Triac dimmers act as line-voltage decoders that translate digital bus commands into smooth trailing-edge or leading-edge phase-cut AC power for downstream fixtures. Our DALI units, including the DT-B and DT-C series, comply with IEC 62386-102 and IEC 62386-207 standards with address setting via onboard keys or rotary switches; check our guide to DALI dimming for bus wiring details. For stage and DMX512 networks, decoders like the S1-D1 provide numeric channel addressing and bidirectional RDM feedback.
Standard compact puck dimmers top out at 1.5A to 2A, which caps your safe LED driver load at roughly 200W to 240W on 120V mains before overheating occurs. Rather than splitting your room wiring into multiple sub-circuits, install our 6A high-power SK1 phase-cut dimmer, which manages up to 720W of LED load on 120VAC or 1440W on 240VAC. The DIN-rail SK1 accepts DMX512, 1-10V, rotary knob, or RF wireless inputs and features an active numeric display for load calibration.
Yes, you can dim driverless mains-voltage tape directly from an AC Triac dimmer, provided the strip's internal rectification circuit is explicitly labeled phase-cut dimmable. Because line-voltage strips plug directly into household power without an external power box, our phase dimmers wire directly in series between the circuit breaker and your high-voltage AC LED strip lights. Always select trailing-edge mode on the dimmer to prevent micro-surges across the strip's surface-mount resistor network.