2-Pin Single Color LED Strips Parts

Display all products in this category 1 to 20 (of 31 products)

(0)
Model:SC-ACCESSORIE-001
- Length: 1m/3.28ft
- Wire Size:18/20/22/26AWG
- Material: Pure copper
- Model: RVB
Various Options In Stock
$0.99The 2-pin power cable wire uses oxygen-free tinned copper wire, low resistance, long-lasting and stable conductivity. Resistance directly affects the point's consumption during transmission, and the smaller the resistance, the better. It is suitable for when the single color LED light strip has a voltage drop, the power cord can be used to supply power separately at both...

(0)
Model:SC-ACCESSORIE-001W
- Length: 1m/3.28ft
- Wire Size:18/20/22AWG
- Color: White
Various Options In Stock
$0.99The white power wire cable uses oxygen-free tinned copper wire, low resistance, long-lasting and stable conductivity. Resistance directly affects the point's consumption during transmission, and the smaller the resistance, the better. It is suitable for when the single color LED light strip has a voltage drop, the power cord can be used to supply power separately at both ends of the f...

(0)
Model:HV-ACCESSORIE-2PIN
- AWG:18/20 optional
- Shell Color:White/Black
- Legnth:3.28ft/1m
- Waterproof Rating:IP65
Various Options In Stock
$1.20The waterproof power cable is made of imported high-strength plastic, which has good flexibility and is not easy to break, and uses PVC protective sleeves inside and outside, with double protection of the core, and stable transmission. The power cord is suitable for outdoor monochromatic LED light strip , but it cannot be prevented from underwater. When the length of the single color led light...

(0)
Model:SC-ACCESSORIES-016
- Wire Size:18AWG/16AWG
- Length:3.28ft/1m
- Color:transparent
- Waterproof Rating: IP68
Various Options In Stock
$1.39Pure copper 2-pin 16AWG/18AWG Waterproof Tinned Transparent Wire Roll For waterproof IP68 LED Strip Lights, Use it in Water or Outdoor, 1m/3.28' by sale.The power cord uses tinned copper wire, low resistance, long-lasting and stable conductivity, pressure resistance, water resistance, antifreeze, sun protection, wear resistance, pull resistance, good flexibility, and it is not easy to break....

(0)
Model:SC-ACCESSORIES-029
- Applicable Width: 8mm/10mm
- Applicable Color: COB singel color
- Type: Board to Board
- Waterproof Level: IP20
Various Options In Stock
$0.89Type: Board to Board 8MM 10MM COB monochrome lamp with connector, board-to-board indirect soft lamp with connection buckle, 2P lamp with crystal link terminal

(0)
Model:SC-ACCESSORIES-031
- Applicable Width: 8mm
- Applicable Color: COB monochrome lamp
Various Options In Stock
$0.99Type: Single head butt joint 8MM COB monochrome lamp with connector single head butt joint soft lamp with connection buckle 2P lamp with crystal link terminal

(0)
Model:SC-ACCESSORIES-030
- Applicable Width: 8mm/10mm
- Applicable Color: COB Single Color
Various Options In Stock
$1.39Type: Double butt joint 8MM 10MM COB monochromatic lamp belt connector Double head butt joint soft lamp belt connection buckle 2P lamp with crystal link terminal

(0)
Model:SC-ACCESSORIE-002
- PCB Width:5mm/8mm/10mm/12mm
Various Options In Stock
$0.29The LED fast connector can easily connect two LED light strip without welding, which can solve a lot of your problems. It is simple and convenient for people without welding experience, saving time and money. You can use them to bend your led light strip around corners or to extend it past an obstacle. Our connectors feature an easy solderless clip connection and come in lengths from 6 inches to...

(0)
Model:SC-LACCESSORIE-003
- PCB Width:10mm
- Shape:L type
- Production Process:cold pressing
- Interface Type: flat
- Working Voltage: 12V
- Support Card Number: dual card
Various Options In Stock
$0.69Our L-shaped connector for LED strips has two easy-to-fasten connectors and a 90-degree L-shaped PCB board. The L-shape led fast connector is used for corner or rotation connection. You only need to insert the led strip light into the connector and clamp the cover. No welding is required. Using the L-shape can avoid twisting and possibly damaging the LED strip. Use the connector to install the...

(0)
Model:SC-TACCESSORIE-003
- PCB Width:10mm
- Shape:T type
- WT:-40℃ to 70℃
- Production Process: cold pressing
Various Options In Stock
$0.89Type T is used for 10mm wide monochromatic LED light strips , used for 3-way fast shunt connection, only need to insert the strip light into the connector and clamp the cover, without welding. Use the LED solderless connector to install the light bar at the turn to make the whole layout neat and beautiful. Superlightingled's T-connector is made of sturdy fireproof material, which is resistant...

(0)
Model:SC-+ACCESSORIE-003
- PCB Width:10mm
- Shape:+ type
- Production Process:cold pressing
- WT:-40℃ to 70℃
Various Options In Stock
$0.99The + shape LED fast connector can easily connect two LED light strip without welding, which can solve a lot of your problems. It is simple and convenient for people without welding experience, saving time and money. You can use them to bend your led light strip around corners or to extend it past an obstacle. Our connectors feature an easy solderless clip connection and come in lengths from 6...

(0)
Model:SC-ACCESSORIES-014
- Wire Size:20AWG
- Material:PA66 UL 94-0
- Operating Temperature:-20~ 80°C.
- PC Heat Resistance:150°C
Various Options In Stock
$0.59These NEW LED strip connectors from designed to be double-sided clamping strips design, copper pins non-piercing circuit board, and to make solderless, tight, secure connections between two sections of strips together with ease. Maximum AMPS : 5A, handle higher amperage without failure at higher wattage of LED strips . Good to keep current straightly running without making the latter sections to...

(0)
Model:SC-ACCESSORIES-013
- Apply: Single color
- PCB Width:8mm/10mm
- Style:Strip to wire
Various Options In Stock
$1.68Features: 1. You can DIY strip-to-wire-bridge led fast connector wire that is up to 0.5 meters long 2. No need stripping wire insulation nor waterproof coating of led strip light before connection (pierce-to-contact), easily connect your led strip to power, dimmer or controller without any soldering, just pliers needed 3. Powerful with as much as total 10A current supported, allowing you to...

(0)
Model:SC-ACCESSORIES-025
- PCB Width:8/10mm
- Color:transparent
- Conection Type:Board to Board
Various Options In Stock
$0.59The solderless LED connector uses Pierce contact technology, which can fix the LED light strip well, and there is no need to worry about slipping out of the connector even if you use a tape lamp with VHB foam. The transparent cover will not cover the light of the first LED, so the dark area in the lighting space is almost invisible, making the lighting effect more uniform. The connector has a...

(0)
Model:SC-ACCESSORIE-004
Various Options In Stock
$0.99Male Female 2Pin Single Color LED Strip Lighting Fast Power Supply DJ Connector Accesories

(0)
Model:SC-ACCESSORIE-007
- PCB Width:8/10mm
- Material:Plastic, Metal
- Assembled Length:6.3 inches
Various Options In Stock
$0.59Features: 2 pin solderless led connector for 8mm wide SMD3528 2835 single color LED strip (Not suitable for high-intensity 120LEDs/M strips) Working Condition: Can be able to stand up to 4A current and 0-24V voltage; Heat resistance level from -20 ~ 100 degrees C. One end with a clip to strip, the other with wires as lead; Solderless quick snap down Compatible with both waterproof and...

(0)
Model:SC-ACCESSORIE-006
- PCB Width: 5/8/10mm
- Working Voltage:DC0-24V
- Plastic Material:PBT&PVC
- Metal Material: Copper
Various Options In Stock
$0.59Features 1.For use with SMD 3528 single color led light strips . Compatible with both non-waterproof and waterproof light strips without any soldering to be required. 2. The LED strip light must be 8mm wide in order to use this connector. 3. We do suggest using this led fast connector for powering up to 5m of LED strip. To power, longer runs a soldered connection is suggested. 4. These extension...

(0)
Model:SC-ACCESSORIE-008
- PCB Width:8/10mm
- Connector Cable Length:20cm/7.87inch
- DC Size:5.5*2.1mm
Various Options In Stock
$0.99Solderless LED connector the most common power adapters directly to 8mm LED strip light with this solderless 5.5*2.1mm Female Barrel Connector. This allows you to split a reel of led strip lights into multiple smaller runs or connect a barrel type driver to strips that didn't come with a barrel connector. Open the top of the connector, insert the strip under the pins,...

(0)
Model:SC-ACCESSORIES-021
- Wire Size:20AWG
- Shell Color: Black
- WT:-50℃ to 200℃
- Waterproof Rating: IP68
Various Options In Stock
$1.28The LED connector uses an oxygen-free copper core to reduce transmission loss, fast transmission speed, and no gaps. The wire stranding distance offsets the radiation loss between the wires, improves work efficiency and has a long service life. The power cord part adopts double-layer insulation protection jacket to improve the abrasion resistance of the wire, extend the oxidation resistance of...

(0)
Model:SC-ACCESSORIES-028
- Wire Size:22AWG
- Material:PVC
- Length:150mm
- WT:-40℃ to 70℃
Various Options In Stock
$1.29The power cord is made of pure copper wire, which has good conductivity, low resistance and low consumption. The power cord uses oxygen-free tinned copper wire, which has low resistance and lasting stability. Resistance directly affects the consumption at this point in the transmission process, and the smaller the resistance, the better.The led connector suitable for led strip light. ...
Display all products in this category 1 to 20 (of 31 products)
© 2010-2022 SuperLightingLED.Inc. All Rights Reserved.
Site Map
top