Applications
Where LED Strip Lights Go: Real Rooms, Real Installs
Every picture on this page is something you can build with what is in stock at SuperLightingLED right now — kitchen toe-kicks, stair treads, bedroom coves, neon signs, whole-house rooflines. Under each photo we say which strip, profile or kit it is, and link to it. Standard reels ship within 1–2 business days; if your run needs an odd length or a different connector, we cut and solder it for you before it ships. Use the page as a shopping list, or send us a photo of your own room and we will tell you what to order.
LED strip lighting in kitchens, living rooms, bedrooms and bathrooms
Indoors, the most-used product is a warm-white COB or 2835 strip in an aluminium profile: no visible dots, a clean line of light, and dimmable from a wall switch or a remote.
LED strip stair lights that switch on as you walk
Our stair kits put a short strip under each tread and a sensor at the top and bottom; the steps light one after another in the direction you are walking and switch off behind you.
Outdoor LED strip lights on rooflines, gardens, decks and bridges
Outdoor runs use IP65–IP68 LED strip or silicone neon. Permanent roofline lights are addressable LED strip in a track: white all year, any colour for the holidays, from a phone.
LED neon strip signs, curves and lines of light
Silicone neon is an LED strip inside a diffusing tube: dot-free, bendable, and waterproof enough for outdoors. We thread the strip into the tube for you and seal the ends.
LED strip lighting for shops, bars, hotels and offices
Commercial jobs usually mean longer runs: constant-current LED strip that stays even over 10–20 m, 24 V power supplies and DALI or 0–10 V dimming.
When every LED has its own colour
Addressable LED strips (WS2812B, SK6812, WS2815, DMX) let you run chases, gradients and video across the strip. Tubes, panels and tunnels are all built from the same product.
Aluminium profiles and COB LED strips: the two parts behind most of these photos
An aluminium profile hides the strip, spreads the heat and gives you a clean diffused line; a COB LED strip gives you that line without any visible dots even without a diffuser.
Planning your own LED strip installation: tell us the room, we tell you the parts
Send a photo or a sketch
Room size, where the power socket is, and what you want the light to do. We reply with the strip, the power supply, the controller and the profile — as a link to a filled cart.
Odd lengths and connectors
A 3.7 m run, a 22 cm tail, a specific plug: write it in the order notes. SuperLightingLED runs its own production line, so we cut, solder and seal to your measurement before shipping — there is no minimum. Bigger jobs are on the custom services page.
Do the maths yourself
Power calculation, voltage drop, cutting points and controller compatibility are all in the technical reference; ordering and payment are covered in how to buy.
About the photos: the installations above are shown as examples of what the products do. Some are our own customer projects and product photography; others are reference images of the type of installation. Send us a picture of your finished project and we will add it here with a link to your site if you like.
Start your LED strip project with the room you are in
Everything on this page ships from stock at SuperLightingLED within 1–2 business days, worldwide, free over $299.
Not sure which strip? Start with the FAQ or the technical reference.






































































