DMX512 LED Strips Series

DMX RGB led strip lights is a kind of programmable LED strip which directly support DMX512 control protocol, it adopts intelligent chips such as PDFUCS512H6L, UCS512C4, UCS512H4LB1.1 MB, SM18512SK, UCS512D, UCS512CNB, HI5DS and matches with high brightness three-in-one SMD5050 or SMD2835 RGB package, can output 281.4 trillion colors mixed effect.

Features of LED Strip RGB DMX Lights

Our RGB DMX led strip has diverse specifications, with densities ranging from 24, 36, 48, 60, 72, 80, 96, 120 to 240 lights per meter (low density is suitable for ambient lighting, while high density can present delicate dynamic effects), 8mm 10mm 12mm 15mm 20mm flexible FPC substrate, working voltage covers 5V, 12V, 24V, 36V 48V for safe use and reducing voltage drop over long distances, and IP20 (indoor) to IP68 (fully waterproof, universal for outdoor/underwater scenarios) outdoor IP ratings. 

RGB DMX controlled led tape can be single or dual signal DMX 512 transmission, each smart DMX ic chip controls 3 DMX channels (corresponding to R, G, B respectively), the total number of DMX512 channels in a single strip roll ranges from 2×3 to 40×3. It is necessary to match the DMX controller that supports sufficient number of channels, otherwise the DMX RGB strip cannot be fully lit.

DMX RGBW led strip is based on the DMX512 control protocol. Each DMX IC pixel of each RGB white led strip has four independent control channels for red, green, blue and white, providing precise and rich color control. Our DMX RGBW lights strips are available in RGBW 4-in-1 and RGB+W designs, providing seamless color temperature and color transitions and a more uniform white light output. SMD5050 standard package and smaller, higher density SMD4040 package offer good performance for most conventional lighting projects and high-end applications requiring finer light effects. 

Compared with PWM RGBW and SPI RGBW led strips, DMX RGBW led tape uses DMX512 control signals, which can achieve lighting regulation and control in a wider range and with higher precision; eliminating stroboscopic or uneven color problems and ensuring smooth and stable lighting effects.

The wide voltage range of 5V, 12V, 36V to 48V allows DMX512 RGBW led strip to be used in a wide range of project sizes and installations, from small DIY projects to large scale installations or long distance power transmission projects.

DMX 5-in-1 LED Strip combines the RGB color channels (red, green, blue) with the CCT (tunable white) channels to independently adjust the color temperature (warm to cool white) and color via the DMX512 protocol. Color and color temperature stacked or used individually make these 5-in-1 RGB tunable white DMX controlled led strips an all-in-one tool for addressable programmable lighting design. This flexible combination allows you to switch freely according to the needs of the scene, from soft warm light to cold technological white light, with RGB dazzling color gradient, to create an immersive visual experience.

DMX512 vs. SPI vs. PWM RGBCCT Control

These DMX512 RGBCCT (RGB + Tunable White) LED strips and fixtures integrate seamlessly into your existing DMX control network without requiring additional protocol converters. 

While SPI RGBCCT lights also feature addressable ICs for dynamic pixel tracking, their standalone programming flexibility is slightly more constrained compared to DMX protocols. Because SPI control systems operate on an independent architecture, integrating them into a master DMX environment requires a dedicated SPI-to-DMX decoder.

PWM RGBCCT represents the foundational method for achieving dynamic RGB colors paired with adjustable white color temperatures. Driven directly via constant-voltage PWM dimming controllers, these non-addressable RGBCCT light strips require a PWM-to-SPI decoder to join an SPI network, or a DMX-to-PWM decoder to connect to a master DMX control system.

With high waterproof grade and good weather resistance, DMX rope light is ideal for outdoor landscape lighting, building facades, shopping mall decorations, advertising displays, etc. Neon-like smooth visual lighting effect is its most significant feature. This spotless, visually striking neon dmx light expression can effectively attract the audience's attention and enhance the artistic and dynamic sense of space, whether in architectural silhouettes or nighttime landscapes. 

Customized lengths and bending direction options give the DMX led rope a high degree of flexibility. The length of the dmx controlled rope light can be customized according to the unique needs of the project, avoiding many of the limitations of traditional lighting fixtures. And the flexible design allows DMX rope lighting to adapt to curves, angles, and other complex shapes even non-regular designs in landscape art. DMX led rope light is an attractive option for high-end projects that require customized lighting solutions.

DMX vs. SPI Addressable Neon Flex: Are They Interchangeable?

The LED ICs in DMX neon rope lights can be directly decoded by a DMX controller, so if your controller uses the DMX512 protocol, you can apply these outdoor rope lights directly. However, if you choose an SPI-addressable neon LED strip, it won’t recognize your DMX signal, so you’ll need to use a DMX-to-SPI signal converter. Therefore, please select the appropriate pixel neon light strip based on your project’s control system.

These DMX white LED strips are controlled by UCS512 ic chip, which can be directly connected to DMX lighting control system to realize precise dimming and dynamic light effects such as gradient, fade in/out, flashing, breathing, running water chase, etc. Each IC on the white dmx led light strip is one DMX pixel and one DMX channel, with 20 to 50 DMX512 pixels and channels per reel. One DMX 512 channel controls 100-250mm (3.94-9.84inch, 0.33-0.82ft) white LED lights. 

Our low voltage DMX white light displays 3000K warm white, 4000K natural white, 6000K cool white color, other temperatures can be customized. The light strips are made of cuttable FPC board and waterproof IP rating design, flexible to adapt to indoor outdoor straight or curved installation. DMX512 single signal (4-pin) and redundant signals (5-pin) are available.

DMX White vs. SPI vs. PWM: Which One Is Right for Me?

Both DMX White and SPI Addressable White LED lights allow for fully customizable, programmable lighting effects. The primary difference lies in their signal transmission protocol. Be sure to select the addressable white LED strip type that directly matches your control system's architecture.

PWM White lights provide continuous illumination where all white LEDs operate under the exact same dynamic pattern across the entire strip. Without individual pixel addressability, it serves as the ideal, cost-effective choice for foundational ambient and general task lighting.

Direct DMX plug and play variable white led light strips with 2-in-1 or 3-in-1 color temperature scheme, only one led ribbon strip can realize smooth transition from 2700K warm yellow light to 6500K cool white light, suitable for lighting occasions that need different kelvin led color temperature control or switching. 

One UCS512 IC on the flexible ribbon led strip is one DMX512 pixel, one IC on the 2-in-1 CCT type has two DMX channels, and one IC on the 3-in-1 CCT type has three DMX channels. Available in 4-wire single-signal and 5-wire dual-signal led ribbon DMX adjustable white versions.

What does “IC” mean in Variable White LED strips?

Installing IC chips in variable white LED strips allows you to intelligently control each LED driven by an IC. For example, you can set the six LEDs controlled by the first IC to warm white (3000K) and the six LEDs controlled by the second IC to cool white (6000K), enabling you to create your own unique lighting effects.

There are many types of LED ICs, primarily distinguished by the control signals they use. The external ICs used in these DMX variable white light strips are compatible with DMX signals, so you can program them directly using a DMX controller. Some addressable variable white light strips use SPI IC chips, such as the SK6812, which is only compatible with SPI signals.

DMX String Lights provide an energy efficient and sustainable landscape lighting solution for outdoor and building lighting that requires large scale light placement. These DMX controlled string lights consisting of multiple DMX led pixel lights are individually addressable and have a high IP67 water and dust resistance rating. 

You can adjust the length of the DMX light string and the number of DMX pixel points according to the actual needs of the installation location such as the outline of the building, so as to flexibly respond to the lighting needs of different scales. The center distance (light spacing) and number of each DMX addressable led string can be customized.

Using high brightness SMD5050 and low power consumption LEDs, the whole system also consumes less power when using DMX led string lights in large area arrangement and longer range, efficient wiring and power configuration. Visual creative expression through DMX512 signaling controller to precisely control the lighting changes of each LED DMX pixel.