Related Products
Tick the accessories you need and add them in one go
Can.$52.22
Can.$190.62
Can.$64.93Can.$70.618% off-SPI-WiFi-PIR-Sensor-Addressable-LED-Strip-Controller.jpg "ES-D(WT) SPI WiFi PIR Sensor Addressable LED Strip Controller")
Can.$47.99-5-to-24VDC-Dual-Push-Button-Tuya-WiFi-LED-SPI-Controller.jpg "ES-DP(WT) 5 to 24VDC Dual Push Button Tuya WiFi LED SPI Controller")
Can.$26.80
Can.$8.46
Can.$9.87Can.$12.7022% off
Product Information
Introducing our revolutionary 24V TM1934 Digital White LED Strip, engineered for exceptionally long runs up to 20 meters (65.6 feet) from a single power source. This digital led strip eliminates the common issue of voltage drop, ensuring consistent brightness and performance across its entire length.
For professional installers and ambitious DIYers, voltage drop is the primary challenge in large lighting projects. The TM1934 Digital White LED Strip directly solves this problem. Its innovative constant current architecture allows you to create stunning, 20-meter continuous lines of light without the need for complex wiring, multiple power supplies, or signal amplifiers. This drastically reduces installation time, cost, and potential points of failure.
Featuring high-quality SMD5050 LEDs and advanced TM1934 smart ICs, it allows for dynamic, individually addressable white lighting effects.
The dual-signal design provides enhanced reliability for permanent installations where maintenance is difficult, making it the perfect solution for large-scale architectural lighting, expansive cove installations, and commercial projects where seamless, uninterrupted lines of light are critical.
Simplify your wiring and achieve professional results with this super long run LED solution.
Key Features
Extended 20-Meter Run
Power a full 20m (65.6ft) reel from one end with no noticeable voltage drop or dimming.
Dynamic White Control
Each group of 6 LEDs is individually addressable via the TM1934 IC for creating chasing, flowing, and custom lighting effects.
Dual-Signal Redundancy
Features two data lines (DAT1, DAT2) for a more robust and reliable signal transmission, preventing failures down the line.
Product Specifications
| Parameter | Details |
|---|---|
| Product Model | TM1934-20M-24V5050W |
| Input Voltage | DC 24V |
| IC Type | TM1934 |
| Max Power Consumption | 14.4 W/m |
| Total Power (20m Reel) | 288W |
| LED Type | SMD 5050 |
| LED Density | 60 LEDs/meter |
| IC Density / Pixels | 10 ICs/meter (10 pixels/m) |
| Control Group | 1 IC controls 6 LEDs |
| Reel Length | 5m/16.4ft, 10m/32.8ft, 15m/49.2ft, 20m/65.6ft |
| PCB Width | 12mm |
| LED Color | Warm White 3000K, Natural White 4000K, Daylight 6000-6500K |
| Cut Interval | Every 6 LEDs (100mm / ~3.94 inches) |
| IP Rating | IP20, IP65, IP67, IP68 |
| Connectors | 4-pin JST-SM (Data/Power) & 2-pin JST-SM (Power Injection) |
| Operating Temperature | -20°C to +50°C |
Power Consumption Reference
| Length | Power | Driver |
|---|---|---|
| 5m | 72W | DC 24V 90W-100W Power Supply |
| 10m | 144W | DC 24V 180W-200W Power Supply |
| 15m | 216W | DC 24V 250W-300W Power Supply |
| 20m | 288W | DC 24V 350W Power Supply |
Frequently Asked Questions
Q: Can this 20-meter LED strip really run from a single power connection?
A: Yes. The integrated TM1934 constant current ICs eliminate voltage drop, allowing the entire 20-meter (65.6ft) length to be powered from one end with consistent brightness.
Q: What kind of controller do I need for this digital white strip?
A: You need a digital LED controller that supports the TM1934 IC protocol. Many universal SPI controllers are compatible. Always check the controller's specifications.
Q: What size power supply is required for the full 20-meter reel?
A: The full 20m reel consumes a maximum of 288W (20m x 14.4W/m). We strongly recommend a 24V DC power supply with at least 350W capacity to provide a 20% safety margin.
Q: Can I cut the strip to a custom length?
A: Yes, the strip can be cut every 6 LEDs, at the designated cut line marked on the PCB. The cut interval is every 10cm (approx. 3.94 inches).
Q: What is the purpose of the two data wires (dual signal)?
A: This strip has a primary data line and a backup data line. If one pixel (IC) fails, the signal automatically switches to the backup line to bypass the faulty point, ensuring the rest of the strip continues to work.
Q: Is the strip dimmable?
A: Yes, brightness can be controlled through a compatible TM1934 digital controller. Standard wall dimmers are not compatible.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for TM1934-20M-24V5050WImages
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
