High Voltage DMX512&RDM Decoder
4 productsSkyDance High Voltage DMX512 & RDM Decoder Series is specially designed for DMX-controlled high-voltage LED strip lighting systems. With a universal AC 110–240V input, these decoders convert standard DMX512 digital signals into high-voltage constant voltage PWM outputs, enabling smooth and precise 0–100% dimming without requiring an external low-voltage DC power supply.
Available in 3-channel (1.5A/channel) and 4-channel (2A/channel) models, they support single-color, tunable white (CCT), RGB, and RGBW high-voltage LED strips, making them suitable for a variety of architectural and commercial lighting applications.
- DMX512 & RDM Compatibility: Complies with DMX512, DMX512 (1990), DMX512-A, and RDM standards, enabling reliable integration with professional DMX lighting control systems and remote device configuration. Multiple DMX connection options, including terminal blocks, XLR3, and RJ45 ports, provide flexible system integration.
- Precise & Smooth Dimming: Selectable linear or logarithmic dimming curves and adjustable PWM frequencies of 1kHz, 2kHz, 4kHz, and 8kHz provide flexible dimming performance for different lighting environments.
- Convenient Configuration: An integrated digital display and setting buttons allow easy DMX starting address configuration, while RDM-enabled consoles can remotely configure decoder addresses.
- Standalone & Wireless Control: Built-in dynamic lighting programs and standalone dimming modes allow independent operation without a DMX signal. Optional 2.4GHz RF remote control provides additional wireless control flexibility.
- Reliable Quality & Protection: With CE/RED compliance and a 5-year manufacturer's warranty, they offer a reliable solution for commercial lighting, architectural illumination, building facades, and large-scale high-voltage LED strip projects.
DH4 100 to 240VAC 4 Channel DMX DALI Relay Unit Switch
How High Voltage DMX512 Decoders Control AC-Powered LED Strips
Unlike low-voltage CV DMX decoders that require an external DC power supply, high voltage models connect directly to AC 110–240V mains power and generate regulated high-voltage PWM outputs for compatible high-voltage LED strips.

This architecture simplifies high-voltage LED installations by eliminating separate low-voltage DC power supplies and allowing compatible AC-rated LED strips to operate directly through the decoder. It is particularly useful for long architectural lighting runs, building facades, commercial spaces, and large-scale decorative lighting projects.
High Voltage DMX Decoder Installation & Electrical Safety Guidelines
Because these decoders operate directly from AC 110–240V mains and generate high-voltage DC PWM outputs, correct installation and electrical safety procedures are essential.
- Use Compatible High Voltage LED Strips: Confirm that the LED strip is specifically rated for the decoder's high-voltage output range. Do not connect ordinary DC 12V, 24V, or 48V LED strips.
- Disconnect AC Power Before Wiring: Always isolate the upstream circuit breaker and verify that the circuit is de-energized before connecting or servicing the decoder.
- Connect Protective Earth: Ensure the protective grounding conductor is properly connected to the designated earth terminal.
- Check Output Polarity: Confirm the LED positive and individual channel output connections according to the selected decoder's wiring diagram.
- Respect Channel Current & Power Limits: Calculate the connected LED load for each channel independently. Do not exceed the rated output current or power capacity of the decoder.
- Separate DMX & Mains Wiring: Route low-voltage DMX communication cables separately from AC power conductors in accordance with applicable electrical codes.
- Provide Proper Heat Dissipation: Install the decoder in a suitable enclosure with adequate ventilation and keep its operating temperature within the specified limits.
- Use Suitable Indoor Protection: Both S3-DX and S4-DX have an IP20 rating and are intended for protected installation environments. Do not expose them directly to rain, condensation, or moisture.
For commercial, architectural, and outdoor high-voltage LED strip projects, installation should be carried out by qualified electrical professionals following the manufacturer's instructions and applicable local electrical codes.
FAQ About High Voltage DMX512&RDM Decoder
Direct engineering answers on wiring, load calculations, thermal ratings, and protocol setup for line-voltage DMX decoders.
A high voltage DMX512 decoder accepts 110V to 240V AC line voltage directly and outputs high-voltage PWM to drive line-voltage LED strip lights without an external transformer. Low-voltage units in our CV DMX512 RDM decoder range take 12V to 48V DC from an intermediate power brick, which limits single-feed run lengths before drop shows up. By running directly on AC mains, these high-voltage units eliminate secondary DC power supplies and let you drive continuous architectural runs of 30 to 50 m off a single feed.
No external DC power supply is required for a high voltage DMX512 decoder because the unit wires straight into standard 110V to 240V AC mains. The onboard electronics convert the incoming line voltage to high-voltage pulsed DC output to drive AC110/220V LED strip lights directly. This eliminates bulky transformer enclosures in ceiling plenums and facade runs. You simply run your line, neutral, and ground into the input terminals, and feed your high-voltage LED strip directly from the output terminals.
Choose based on your channel count and color configuration. The S3-DX high voltage DMX512 decoder offers 3 output channels rated for 500W at 110V or 1000W total at 220V, making it built for single-color, tunable white, and high-load RGB LED strip lights. The S4-DX model provides 4 dedicated output channels rated at 2A per channel (up to 4 x 220W at 110V or 4 x 440W at 220V), which is designed specifically for 4-wire high voltage RGB LED strips and RGBW layouts where four independent control addresses are required.
A high voltage DMX512 decoder requires a dedicated breaker feed with properly rated 14 to 16 AWG conductors landed on the line, neutral, and earth ground screw terminals. Always de-energize the upstream breaker before landing wires, because terminal blocks on line-voltage units carry live 110V to 240V potential. Keep your DMX512 control cable in a separate conduit or segregated raceway away from the AC power conductors to prevent 50/60 Hz electromagnetic induction from distorting the digital control packets.
Residual ghosting on a high voltage DMX512 decoder usually stems from capacitive leakage current between parallel AC line conductors or an ungrounded neutral in the distribution panel. Because high-voltage LEDs require very low current to glow dimly, induced voltages in long wire runs can keep diodes faint even at a 0% DMX value. Adding a small 100k ohm, 2W bleeder resistor across the positive and negative output terminals drains this micro-leakage and pulls the diodes to complete darkness when the DMX signal drops to zero.
RDM allows two-way communication so you can assign DMX start addresses and inspect decoder status from your central DMX console without climbing a ladder or bucket truck. When you plug an RDM-compliant console or distribution box into the control link, the high voltage DMX512 decoder broadcasts its unique UID. From the ground console, you can query device temperature, readdress channels 1 through 512, and test channel outputs directly, eliminating the need to physically access the 3-button digital display on the decoder housing.
Exceeding the 2A threshold on an S4-DX high voltage DMX decoder triggers the internal overload protection circuit, which shuts down that specific channel to protect the switching MOSFETs from burning out. The output will drop out or strobe intermittently until the load is reduced below 2A. On a 110V line, 2A equals 220W; on 220V, it equals 440W. If your run demands more current, split the LED strip load across multiple channels or introduce a dedicated DMX signal amplifier to split control across separate decoders.