96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip

Model: 12V-WS2811-2835X6.5MM Review stars 0.0 (0 Reviews) Various options in stock
Starting at: Can.$60.70 Can.$46.5723% off
Qty Discounts Off Price
1-19
Can.$46.57
20-49
Can.$45.64
50-99
Can.$44.71
100+
Can.$43.78
* Discounts may vary based on options below
Select Specifications:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

6.5mm Narrow 2835SMD 96LEDs/m High Density 12V External WS2811 Digital RGB LED Strip. Every three lights of a segment are controlled by an external WS2811 IC chip, allowing the LEDs on different segments to be different colors. This LED strip WS2811 12V features an ultra-narrow PCB width 6.5mm/0.26in and high LED density 96LEDs/m to bring high brightness in small place dream color lighting projects. 12V WS2811 pixel strip has a very wide application range and appropriate run length, is the voltage of choice for most lighting projects.

 

• 12V 96LEDs/m 6.5mm type: SMD2835 RGB with UCS1903 ICs, 32 pixels per meter, 3-LED/31.25mm cuttable, 15W/M

• 12V 96LEDs/m 6mm type: SMD2835 RGB with FW1903 ICs, 32 pixes per meter, 3-LED/31.25mm cuttable, 15W/M

• 24V 96LEDs/m 6.5mm type: SMD3535 RGB with TM1903 ICs, 16 pixes per meter, 6-LED/62.5mm cuttable, 18.5W/M

 

WS2811 Datasheet Download PDF  

 

Product Specification

Light Strip Type:  96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip
LED Chip:  SMD2835 + External RGBIC
Input Voltage:  DC12V, DC24V
Power:  15W/m-18.5W/m, 72W/roll-92.5W/roll
Working Temperature:  -20℃~+45℃
Storage Temperature:  -20℃~+60℃
LED Color:  RGB Dream Color
PCB Width:  6.5mm/0.26in
LED Quantity:  96 LEDs/m, 480 LEDs per roll
IC Quantity: 
16-32 ICs/m, 80-160 ICs per roll
Cut Unit: 
3/6 LEDs can be cut (31.24mm/62.5mm)
Waterproof Rating:  Non-waterproof IP20, Outdoor Waterproof IP67 IP68
Strip Length:  5m/16.4ft

 

How To Wire 2835 RGB WS2811 LED Strip?

addressable led strip wiring diagram

96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for 12V-WS2811-2835X6.5MM
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip96LEDs/m 12V WS2811 6.5mm Small Addressable LED Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →