APA102 Daylight White DC5V 30LEDs/m Addressable Led Strip - 5m/16.4ft per roll

Model: APA102-30-5050SMD-D Review stars 0.0 (0 Reviews) Various options in stock
Starting at: Can.$70.58
Qty Discounts Off Price
1-4
Can.$70.58
5-9
Can.$69.17
10-14
Can.$67.05
15+
Can.$64.23
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Light Color :
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

This APA102 Daylight white  DC5V 30 LEDs/m  Addressable Led Strip with pure color, 5050 daylight white FPC board on the back of 3M glue, easy to install low energy consumption, high brightness, The performance is stable and can do waterproof processing unique line technology and high standards of anti-static, to ensure the life of the light bar and the use of quality with plastic deck, easy to install seismic, maintenance-free normal life of 50,000 hours or more Applications: Decor, pool, disco, bar, karaoke and other atmosphere lighting, fashion lighting.

 

APA102 Specifications Download   PDF

 

Standards and Certifications

DC5V CE FCC RoHS ISA SGS ISO LIFETIME warranty waterproof

 

Specifications

Input voltage:  DC5V

Power:  9 watt/meter,45 watt/roll

LED resource:  SMD 5050 LED

Q'ty of LED:  30leds/meter,150 leds/roll, each LED is separately controlled

IC Type:  APA102

Q'ty of IC: 30IC/meter (1 IC drives 1 led chip)

Pixels:  30/meter

Grey scale:  256

Bits/color: 8-bits/color;24bit for RGB

FPC size:  Width: 10mm, High: 3mm

Certification:  CE,FCC,GS,SAA,RoHS,CCC

Color Temp(K):  daylight white

LED Chip Model:  SMD5050

Strip type:  SMD

FPC color:  WHITE /BLACK PCB

Protection rate:  NON-waterproof; IP65; IP67

Colors:  daylight white 

Cuttable:  every LED is cuttable; 

Package:  5meters/reel in anti-static bag;with adhensive tape on the back

Average Life (hrs):  50000Hours+

 

How to connect and control APA102?

The APA102 led strip has 4 wires for sending data - one 5V+ wire, one GND wire, one data wire, and one clock wire. That means you need 4 pins to control strip. This strip comes as a single full meter with a 4-pin JST SM connector on each end. To power this strip, you need 5V power supply.  

APA102 Daylight White DC5V 30LEDs/m Addressable Led Strip - 5m/16.4ft per roll

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for APA102-30-5050SMD-D
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

APA102 Daylight White DC5V 30LEDs/m Addressable Led Strip - 5m/16.4ft per rollAPA102 Daylight White DC5V 30LEDs/m Addressable Led Strip - 5m/16.4ft per rollAPA102 Daylight White DC5V 30LEDs/m Addressable Led Strip - 5m/16.4ft per roll

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - With Brackets · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 10mm (0.39in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →