• 12V SK6813 Dual Data 600 Pixels 5050 RGB Individual LED Digital Strip Reel
  • 12V SK6813 Dual Data 600 Pixels 5050 RGB Individual LED Digital Strip Reel

12V SK6813 Dual Data 600 Pixels 5050 RGB Individual LED Digital Strip Reel

Model: 12VSK6813-5050RGB-120W10 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: £50.07
Qty Discounts Off Price
1-9
£50.07		 10-19
£49.06		 20-49
£48.06		 50+
£47.06
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Select LED Quantity:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

This 5050 SK6813 RGB LED strip is a high performance, high density individually addressable LED strip designed for home decor and commercial applications. It uses SMD5050 RGB beads with built-in SK6813 intelligent circuitry as the strip light source, each LED diode is an individual pixel point.

SK6813 can be regarded as SK6812 with dual-signal data input, is fully compatible with SK6812 control protocol, with good stability and reliability of data transmission.

SK6813 led strip supports RGB color personalized control, 120 pixels/meter high-density layout. Driven by an SPI controller and 12V power supply like X7 wifi RGB controller and LRS-100-12 power supply in the kit, it delivers vibrant color effects and dynamic lighting displays. With a power consumption of 15.6W per meter, the strip maintains high efficiency even at maximum brightness.

 

• 12 Volt dc drive

• 5050 individually addressable

• 120 RGB lights per meter

• 10mm flexible PCB width

• Indoor and outdoor waterproof versions available

 

Product Specification

Product Type:  SK6813 5050 RGB Individual LED Digital Strip Light
LED Chip: 
Built-in SK6813 5050 (1 IC drives 1 LED)
Input Voltage:  DC12V
IC Quanlity:  120/m, 600/reel
LED Quantity: 120 LEDs/m, 600 LEDs/reel
Cut Length:  1-LED, 8.33mm/0.33in
Power:  15.6W/m, 4.75W/ft, 78W/reel
LED Color: RGB
PCB Width: 10mm for IP20, 12mm for IP67 and IP68
Waterproof Rating: Non-waterproof IP20, waterproof IP67 IP68
Beam Pattern: 120 degree
Connector:  4-pin JST male and female
Length:  5m 16.4ft roll

 

4-pin dual signal SK6813 RGB led strip wiring diagram: 

dual signal SK6813 led strip wiring diagram

12V SK6813 5050 RGB Individual LED Digital Strip Light Reel

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for 12VSK6813-5050RGB-120W10
PDF12VSK6813-5050RGB-120W10 product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

12V SK6813 Dual Data 600 Pixels 5050 RGB Individual LED Digital Strip Reel12V SK6813 Dual Data 600 Pixels 5050 RGB Individual LED Digital Strip Reel12V SK6813 Dual Data 600 Pixels 5050 RGB Individual LED Digital Strip Reel

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - With Brackets · Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Outdoor Silicone Tube IP67 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 10mm (0.39in) · LED density 120LEDs/m. Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.