DMX512 CCT 2 in 1 DC24V 360LEDs Addressable Flexible LED Strip Lights, 16.4Ft/roll

Name: DMX512 CCT 2 in 1 DC24V 360LEDs Addressable Flexible LED Strip Lights, 16.4Ft/roll
Brand: SuperLightingLED
SKU: DCFLS-DMX512-360W10
Price: 69.98 USD
Availability: InStock

Model: DCFLS-DMX512-360W10 Review stars

0.0 (0 Reviews) Various options in stock

Starting at: $69.98

Qty Discounts Off Price
1-4 $69.98	5-9 $68.58	10-14 $66.48	15-29 $65.08	30+ $62.98
* Discounts may vary based on options below

Select Specifications:

Select PCB Width:

10mm (0.39in)

Select Length:

16.4ft (5 meters)

Select Waterproof Rating:

Qty: -+

Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

Product Information

16.4ft LED color temperature addressable 2-in-1 CCT DMX 512 tunable white led light strip for sale. There are 72 CCT lights per meter (12 ICs in one meter), 6 LED lights can be cut, 100mm cut length. 1 pixel = 6 lights, 60 pixels per roll.

It adopts 2in1 SMD5050 CCT LEDs, with external driver DMX512 IC chips, it can realize the white light addressable and programmable. The color tmperature range is from 3000K warm white to 6500K daylight. Various white lighting efects can be displayed on this strip.

Compatible and extended DMX512 (1990) signal protocol, the CCT dmx led strip supports the operation mode of the first installation and then writing code, and any animation effects can be realized through the artnet dmx controller.

Using low voltage DC 24V power supply to run, safer for users.

DMX512 Chips Specifications Download

Standards and Certifications

24VDC

Product Specification

LED Chip: DMX512 SMD5050 IC super brights Chip

Working Temperature: -4°F (-20°C) ~ 122°F (50°C)

Storage Temperature: -40°F (-40°C) ~ 176°F (80°C)

Dimension: 16.4ft/roll, six LEDs can be cut

LED Quantity: 72 LEDs per 1meter (3.28 ft)

IC Quantity: 12 ICs per 1meter (3.28 ft)

Length: 5m/16.4Ft

LED Color: CCT 2 in 1(warm white+daylight white)

PCB Width: 10mm/ 0.39in

Lifespan: 50,000+hours

Warantty: 3 years

Input Voltage(V): 24VDC

Working Power: 18W/m, 90W/16.4ft Max

Beam Pattern: 180 degrees

Water Proof: Waterproof IP20/IP65/IP67/IP68

How To Wire DMX Controlled LED Strip?

DMX LED Strip Wiring Diagram:

DMX512 CCT 2 in 1 DC24V 360LEDs Addressable Flexible LED Strip Lights, 16.4Ft/roll - photo 6

DMX512 CCT 2 in 1 DC24V 360LEDs Addressable Flexible LED Strip Lights, 16.4Ft/roll - photo 7

DMX512 CCT 2 in 1 DC24V 360LEDs Addressable Flexible LED Strip Lights, 16.4Ft/roll - photo 8

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for DCFLS-DMX512-360W10

PDFDCFLS-DMX512-360W10 product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF

Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?

Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights

Do I need power injection?

5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light

Which waterproof rating should I choose?

Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating

Can I cut it to length?

Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.

What size power supply do I need?

Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply

Will it fit an aluminium profile, and how dense are the LEDs?

PCB width 10mm (0.39in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles

Complete your setup

Picked for this model from items in stock.

Controllers and dimmersFor addressable LED strip lights at 24 V