DMX512 CCT/WWA White Adjustable Digital LED Strip, High Density 120LEDs/m

Model: DCFLS-DMX512-CCT/WWA-600W10 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: £50.82 £47.037% off
Qty Discounts Off Price
1-4
£47.03
5-9
£46.09
10-14
£44.68
15-29
£43.74
30+
£42.33
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Input Voltage:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

DMX control CCT/WWA white addressable led lights, this dmx tunable white led strip adapts 2in1 CCT SMD LEDs, the LED color temperature can be adjusted from 2700K warm white to 6500K daylight. And various color temperatures dynamic modes can be displayed on the strip light. 

Each IC controls 12 white lights, each 100mm/3.93" can be cut. You can use K-1000C programmable controller to control this dmx512 light strip. 

 

DMX512 IC UCS512H4L Datasheet PDF  

 

Standards and Certifications

24VDC CE FCC RoHS ISA SGS ISO LIFETIME warranty waterproof

Product Specification

Light Strip Type:  DMX Addressable White LED Strip
LED Chip:  2in1 SMD3527 LED + 10pin UCS512H4L IC
Input Voltage: 

DC24V

Power: 

14.4W/m max, 72W/16.4ft

2835 RGB: 21W/m, 8W/m

Working Temperature:  -20℃~+45℃
Storage Temperature:  -20℃~+60℃
LED Color:  CCT / WWA White light adjustable (Warm white + daylight)
PCB Width:  10mm/0.4"
LED Quantity:  120 LEDs/m, 600 LEDs per roll
IC Quantity: 

10 ICs per meter, 50 per roll

Cut Unit: 

100mm/3.93", 12-LED can be cut

Waterproof Rating:  Non-waterproof IP20, Indoor waterproof IP65, Indoor & outdoor watrproof IP67 IP68
Strip Length:  5m/16.4ft roll
Beam Angle:  120°
Lumen:  22 lm/LED

 

How To Wire DMX Controlled LED Strip?

k-1000c led controller connect dmx512 led strip

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for DCFLS-DMX512-CCT/WWA-600W10
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

DMX512 CCT/WWA White Adjustable Digital LED Strip, High Density 120LEDs/mDMX512 CCT/WWA White Adjustable Digital LED Strip, High Density 120LEDs/mDMX512 CCT/WWA White Adjustable Digital LED Strip, High Density 120LEDs/mDMX512 CCT/WWA White Adjustable Digital LED Strip, High Density 120LEDs/mDMX512 CCT/WWA White Adjustable Digital LED Strip, High Density 120LEDs/m

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
This model runs on DC24V. 5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 10mm (0.39in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →