External LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/m

Model: LB1908-RGB-60B-12V Review stars 0.0 (0 Reviews) Various options in stock
Starting at: A$81.88
Qty Discounts Off Price
1-19
A$81.88
20-49
A$80.24
50-99
A$78.61
100+
A$76.97
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Check our external IC independently addressable RGB LB1908 LED strip with 60 SMD5050 per meter, 10mm/0.4in PCB wide. This is a 4-wire 12V individually addressable led strip, the brightness and color of each 5050 RGB LED are controlled by an external LB1908 IC, so you can get rich colorful effects on the whole strip through an addressable Bluetooth controller CONFULL-SP638E.

Compare to WS2811 and UCS1903 5V external IC individual addressable strip lights, this LB1908 strip bumps the voltage up to 12V and is compatible with most dream color lighting projects.

Compared to SK6812 12-24V wide voltage input and 24V to 5V built-in individual addressable led strips, this LB1908 light strip with every LED cuttable (16.66mm/0.65in cut length), with more accurate cutting precision.

 

Product Specifications

Item Type:  External LB1908 IC Individually Addressable 12V RGB LED Strip
LED Chip:  LB1908 + SMD5050
Input Voltage:  DC12V
Power:  14.4W/m, 72W/Roll
LED Color Temperature:  Addressable RGB
PCB Width:  10mm/0.4in
LED Quantity:  60LEDs/m, 300LEDs/Roll
Control Pixel:  60ICs/m, 300Ics/Roll
Cut Segment:  1-LED (16.66mm/0.65in)
Waterproof Rating:  Non-waterproof IP20 / Waterproof IP65 IP67 IP68
Lumen:  22 lm/LED
Beam Angle:  120°
Strip Length:  5m/16.4ft

 

How to Wire LB1908 LED Strip?

addressable led strip wiring diagram

Dynamic Lighting Effects

Solid Lighting Mode

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for LB1908-RGB-60B-12V
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

External LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/mExternal LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/mExternal LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/mExternal LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/mExternal LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/mExternal LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/mExternal LB1908 IC Individually Addressable 12V RGB LED Strip 60LEDs/m

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
IC on this model: Built-in SK6813 · External LB1908. Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 10mm (0.39in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.