LED Strip Above Cabinet Lighting

You've got a couple of good options for installing cabinet lighting around corners. For a soft bend, you can gently curve the flexible strip itself. For a sharp 90-degree turn, the best methods are to either use a solderless L-shaped corner connector or to cut the strip at the designated cut point and solder a short pair of flexible wires to bridge the gap. Don't just fold the strip back on itself; you risk cracking the circuit board.

The best LED lighting for creating a powerful, room-filling indirect glow is a high-density, high-output strip. When you pair it with a dimmer, it's versatile enough for both bright, functional light and a soft, ambient mood.

Yes, we strongly recommend it. While not strictly required for the lights to work, using one of our aluminum LED channels does three critical things. First, it acts as a heat sink, which significantly extends the lifespan of the LEDs. Second, it protects the strip from dust, grease, and accidental damage. Third, the diffuser cover smooths out the light for a more professional, finished look.

A clean LED cabinet lighting installation is all about planning the wire route. The goal is to run the low-voltage wire from the driver to the strip where it can't be seen. You can often drill a small hole in the top rear corner of a cabinet to pass the wire through to the top. For connecting between two separate cabinet boxes, run the wire behind the front face frames.

It's a matter of taste, but the most popular choices for kitchens fall between 3000K (warm white) and 4000K (neutral white). If you're not sure, the best solution is a tunable white CCT strip. This lets you use a remote or wall controller to adjust the color temperature anywhere from a warm, cozy 2700K to a crisp, cool 6500K, matching the light to the task or time of day.

Yes, absolutely. A huge portion of the 24V LED lighting systems we ship are built to a customer's specific drawing. Just send us a sketch or a list of the precise lengths you need for each cabinet run. Our engineers will spec out a wiring plan and provide a quote for a ready-to-install kit with all strips cut to size and power leads pre-soldered. We usually get this back to you the same business day, and there's no fee or obligation to order.

You can. The LED strip is easily controlled by a smart controller. You simply wire a WiFi or Zigbee controller between the power supply and the strip. We stock a wide range of LED controllers that are compatible with Tuya, Smart Life, and other platforms that link directly to Alexa, Google Home, and Apple HomeKit.