Mini 5mm WS2812 SMD 2020 RGB LED Addressable Strip Light 1 Meter

Model: WS2812-2020-5V-W5 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: A$10.04
Qty Discounts Off Price
1-49
A$10.04
50-99
A$9.84
100-199
A$9.64
200+
A$9.44
* Discounts may vary based on options below
Select Specifications:
Select Input Voltage:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

DC5V Narrow 5mm WS2812 RGBIC LED Strip, each SMD 2020 RGB LED has a built-in WS2812 chip, each LED can be controlled independently, by programming the WS2812 chips inside the LEDs, this addressable strip light can display great dynamic colors, providing creative space for DIY projects. 

Flexible design mini 5mm strip width is easier to install in narrow spaces. The use of small 2020 SMDs makes the LED light more compact and has a large luminous angle, the light is spread more evenly in the surroundings. 1 meter (3.28 feet or 39.37 inches) length of the mini RGBIC led strip provides localized lighting or decorative effects for small DIY projects.

 

• 5V voltage input, low energy consumption for long time running, safe to use in DIY projects and cars.

• RGBIC (RGB with Individual Control), the color of each RGB LED can be controlled separately, providing more flexible lighting effects and more color combinations.

• Small size and large light emitting SMD2020 LEDs, LED lights highly integrated in 1 meter strip length up to 160 and 200 per meter density

 

5V WS2812C 2020 Datasheet Download PDF

 

Product Specification

Item Type:  5mm WS2812 SMD 2020 RGB LED Addressable Strip Light
LED Chip:  SMD2020 + Built-in WS2812 IC
Input Voltage:  DC5V
Power:  15W/m for 200LEDs/m
LED Color:  Addressable RGB
PCB Width:  5mm/0.2"
LED Quantity:  160LEDs/m, 200LEDs/m
IC Quantity: 
160 ICs/m, 200 ICs/m
Cut Unit: 
2 LEDs (12.5mm/0.49" or 10mm/0.4")
Waterproof Rating:  Non-waterproof IP20, Silicone tubing waterproof IP67
Strip Length:  1m/3.28ft, 2m/6.56ft
Working Temperature:  -20℃~+45℃

 

WS2812 SMD 2020 RGB LED Strip Wiring

3-wire single data 5V WS2812 2020 led strip requires an addressable RGB led controller and DC5V power supply to work properly. 

addressable led strip wiring diagram

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for WS2812-2020-5V-W5
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

Mini 5mm WS2812 SMD 2020 RGB LED Addressable Strip Light 1 MeterMini 5mm WS2812 SMD 2020 RGB LED Addressable Strip Light 1 MeterMini 5mm WS2812 SMD 2020 RGB LED Addressable Strip Light 1 Meter

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
This model runs on DC5V. 5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Waterproof IP67 - Adhesive Back · Transparent Heat Shrink Tube IP67 · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
LED density 200LEDs/m · 160 LEDs/m. Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →