Super Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel Strip

Model: SK6812-12V-3535-600X5 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: A$28.71
Qty Discounts Off Price
1-19
A$28.71
20-49
A$28.14
50-99
A$27.56
100+
A$26.99
* Discounts may vary based on options below
Select Specifications:
 Sold Out 
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

This is a high density digital arduino WS2811 12V mini RGB led strip with 120 lights per meter arranged on the 5mm wide strip, WS2811 built-in IC control, each 3535 SMD LED can be different color, individual addressable. 

Ultra-narrow and high-bright features make it ideal for tight places and bring bright lumens. Comes with a 3-pin JST solderless connector and a 2-pin V+/V- power wire at both ends, allows to connect multiple strips together to suit your application, and inject power when voltage drops. Adhesive tape on back for easy installation (IP67 none). 

Configure a SPI controller/programmable controller and 12V power supply for this pixel RGB led strip. 

 

Standards and Certifications

12VDC CE FCC RoHS ISA SGS ISO LIFETIME warrantywaterproof


Product Specification

LED Strip Type:  Individually Addressable RGB LED Strip Lights
LED Chip:  SMD3535
Input Voltage:  DC12V
Power:  18W/m
LED Color Temperature:  Addressable RGB
PCB Width:  5mm/0.2"
LED Quantity:  120 LEDs/m, each LED is a pixel
IC Quantity: 120 pixels /Meter
Dimensions:  L100cm(3.93 in ) x W0.5cm(0.20 in ) x H0.25cm(0.10 in )
Waterproof Rating:  Non-waterproof IP20, waterproof IP67
Strip Length:  1m/3.28ft, 2m/6.56ft, 5m/16.4ft
Beam Angle:  120°
Lifespan: 50,000+hours
Bits/color: 8-bits/color;total 24bit for RGB color

 

Use Instruction

1) Do not use any acidic, alkaline adhesive fixing Product;

2) It is prohibited to make products with a hard object collision, friction;

3) Do not use your fingers to press LED;

4) Don’t make positive and negative reversed;

5) Don’t install when product is working;

6) Installation, repair and maintenance must be made by professional Person;

7) Before you use them make sure the power supply voltage to meet the requirements and wire connection correctly.

addressable led strip wiring diagram

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for SK6812-12V-3535-600X5
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

Super Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel StripSuper Narrow 5mm 120LEDs/m 12V SK6812 3535 Individually Addressable RGB LED Pixel Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Outdoor Silicone Tube IP67 - With Brackets · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →