Super Small 5mm LED Tape

Their main advantage is fitting into extremely tight spaces where standard 8mm or 10mm strips just won't go. We see these 5mm LED lights used for intricate architectural details, inside product displays, embedded in thin furniture panels, and for PC case lighting. They let you put a clean line of light in places that used to be impossible to illuminate.

Yes, a small 12V LED strip is an excellent choice for models, props, and other custom projects. Using 12V gives you more flexibility on run length compared to 5V and works with a wide range of common, compact power supplies. Just be sure to calculate your total wattage to match the driver correctly.

Soldering or using 5mm led connectors, soldering is always the most reliable connection.

Yes, COB will always give you a more seamless line of light. Even with a high-density SMD strip, you might see slight scalloping or spotting up close without a good diffuser. A 5mm COB strip creates a completely uniform glow, which is perfect for reflective surfaces or when the strip itself is visible.

It depends entirely on the model's voltage and LED density. Check the product page for the exact cutting increment, which will be marked by a little scissor icon on the strip itself. It can range from every 50mm on some 12V strips down to every 10mm on others. For ultimate precision, look for our 'Cut-Anywhere' COB strips, which let you cut at any point for a perfect fit.

They're completely different products. Our 5mm LED tape is a flexible circuit board with LEDs mounted on its surface, designed for continuous, linear light. '5mm LED bulbs' usually refer to individual, through-hole LEDs with two long wire legs. Those are components for building your own electronics from scratch, not for architectural lighting. You can't swap one for the other.

Absolutely. A huge portion of what we ship is built to customer drawings. You can specify the exact length down to the millimeter, the type and length of the lead wires, and the specific connector you need on the end. Just send us a sketch or description. An engineer will send back a full wiring plan and parts quote, usually within 12 hours, with no consultation fee or obligation to order.