UCS1903 5mm Narrow High-Density Addressable White LED Strip

Model: DCFLS-UCS1903-5MM-W600 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $21.98
Qty Discounts Off Price
1-19
$21.98
20-49
$21.54
50-99
$21.10
100+
$20.66
* Discounts may vary based on options below
Select Specifications:
Select Input Voltage:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Check this 5mm narrow 120LEDs/m high density SMD2835 addressable UCS1903 white led strip. The 5mm compact design gives this addressable white light strip a small width, making it suitable for installation in narrow spaces or where a delicate arrangement is required to provide even illumination. With an SPI controller or DMX decoder, users can realize rich lighting effects and animations as needed to create personalized lighting solutions.

For the spotless ambient lighting that modern lighting requires, it is recommended to install mini LED strip aluminum extrusions or neon tubing to bring a smooth and continuous light effect to your indoor or outdoor space.

 

Product Specifications

LED Strip Type:  UCS1903 5mm Addressable White LED Strip
LED Chip:  UCS1903 + SMD2835
Input Voltage:  DC24V
Power:  10W/m, 50W/Roll
Working Temperature:  -20℃~+45℃
PCB Width:  5mm
LED Color Temperature:  Addressable 6500K Daylight White / 4500K Natural White / 3000K Warm White
Cut Length:  15LEDs / 125mm(4.9")
LED Quantity:  120LEDs/m, 8 pixels per meter
Waterproof Rating:  Non-waterproof IP20 / Outdoor Waterproof IP67
Color Rendering Index:  Ra>85
Beam Angle:  120°
Strip Length:  5m/16.4ft

 

3-pin UCS1903 Addressable White LED Strip Light Wiring Diagram: 

addressable led strip wiring diagram

UCS1903 5mm Narrow High-Density Addressable White LED Strip

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for DCFLS-UCS1903-5MM-W600
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

UCS1903 5mm Narrow High-Density Addressable White LED StripUCS1903 5mm Narrow High-Density Addressable White LED StripUCS1903 5mm Narrow High-Density Addressable White LED StripUCS1903 5mm Narrow High-Density Addressable White LED StripUCS1903 5mm Narrow High-Density Addressable White LED StripUCS1903 5mm Narrow High-Density Addressable White LED Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
This model runs on DC24V. 5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Outdoor Silicone Tube IP67 - With Brackets · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →