WS2811 DC12V IP65 Waterproof 1.64ft~16.4ft 18LEDs/Ft Full Color Chasing Flexible Addressable LED Strips

WS2811 LED package RGB LED chip and control circuit are contained in SMD5050 assembly, which contains intelligent digital port data latch and signal to shape amplifier drive circuit. Serial single-wire cascade interface, LED light strip accepts SPI controller input data, generates pulse width modulation signal, 256-level brightness adjustment output 16 million dynamic color chasing lighting effects, .

Built-in signal shaping circuit and power-on reset and power-down reset circuits (converting digital signals into analog signals), after the pixels are powered on and reset, the data is input at the DIN terminal, the first pixel IC stores the extracted data in the internal data latch, the remaining data is amplified by the internal shaping processing circuit and transmitted to the next pixel point, the number of pixel cascade is only affected by the signal transmission speed.

LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angle is large, good consistency, low power, long life, and other advantages.The input voltage of LED strip is DC12V, every 3LEDs can be cut, and you can customize the length of the LED light strip; the PCB surface is encapsulated with plastic gel to achieve IP65 waterproof effect, suitable for indoor environment, windproof, dustproof and splashproof. The back of the LED light strip uses high-quality 3M tape, which has strong adhesion and can be easily attached to the wall surface, and does not damage the wall structure, easy to install.

WS2811 Chips Specifications Download     

• Serial single-wire cascade interface

• WS2811 addressable led strip light

• DC12V low-voltage input

• 18LEDs/Ft, high brightness

• Every 3LEDs can be cut

• 256-level brightness adjustment

• 16 millions dynamic color chasing effect

• IP65 Waterproof for indoor environment

• Back with 3M tape, easy to install