Related Products
Tick the accessories you need and add them in one go-Breakpoint-continue-150-LEDs.jpg "WS2813 RGB Lights Individually Addressable LED Strip 5V - 30LEDs/m")
$13.98$32.9858% off
$28.00
$44.98$80.0044% off
$5.99$10.0040% off
$21.99-Breakpoint-continue-300-LEDs.jpg "5V WS2813 5050 RGB Individually Addressable LED Light Strip 60LEDs/m")
$22.98$44.9849% off
$74.98
Product Information
Dual-signal wires version, signal break-point continuous transmission. If one led is damaged, it will not affect the other LEDs working
Individually addressable: Every 1 IC control 1 LEDs, every LED can be individually addressable and show any color you want. The strip can be cut off between every one LED without damaging the rest strip if you want it to shorten or lengthen, also can be re-connect by provided connectors
Waterproof IP67: the ribbon light is covered with a silicone protective sleeve, which can protect it well and makes it easy to clean
Wide compatibility. Works great with Arduino, Adafruit NeoPixel Library, Fast LED library, and Raspberry Pi, etc.
One IC controls one LED to form a loop. The controller controls the circuit in the FPCB through the control IC to control the different effects of the LED light bar changes; such as flashing, chasing, jumping, clockwise racing, counterclockwise racing, Monochrome horse racing, color-changing horse racing, single chase from beginning to end, running water, simulated lightning, etc.; the change effect of this light bar is not limited to the 94 effects built in the controller at present, and you can write it yourself according to customer needs; arrange it into a screen The form can be displayed, text, letters, pictures, animation, etc.
This product uses high-quality high-brightness SMD 5050 LED. It has the characteristics of low power consumption, low heat generation, no glare, and impact resistance.
The color can be adjusted by the remote control according to customer needs.
The light bar has a long life, low power consumption, low voltage DC 5V power supply, environmental protection, and safety.
Cutting and welding are convenient and free: each group of LEDs can form a loop, which can be arbitrarily cut along the upper tangent and welded to meet the needs of various light strip lengths required by customers.
Soft: The soft FPCB board is used as the substrate, which can be docked, bent, cut, and fixed on the uneven surface at will.
Light and thin: suitable for installation in a narrow space, with breakpoint resuming function, damage to one or more points without affecting the normal operation of other points.
WS2813 Chips Specifications Download 
Standards and Certifications
Specifications:
Length: 5M/Roll
Input Voltage: 5V DC
Power: 9W/M,45W/Roll
LED Quantity: 30LED/m, total 150 LEDs
LED Resource: 5050 SMD RGB
Colors: Full-color RGB, dream color changing
IC Type: WS2813 IC
Q'ty of IC: 30 IC/meter (1 IC drives 1 led chip)
Dimensions: L500cm(196.8 in) x W1.0cm(0.39 in) x H0.25cm(0.10 in)
Beam Angle: 120 degrees
Waterproof: NON-waterproof; IP65; IP67
Cuttable: Every one LED is cuttable
Lifespan: ≥50000hrs
Technical Features
The control circuit and RGB chip are integrated into 5050 components, to form an external control pixel
Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of the waveform of the signal takes place.
Refresh Frequency updates to 2 KHz. It supports the lower frequency and inexpensive MCU.
Any two points the distance less than 3m transmission signal without any increase circuit
The data transfer protocol uses a single NZR communication mode. Every pixel adopts auto-reshaping transmit technology, making the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal transmission.
The BIN receives the data signal, which ensures that any the IC's damage does not affect the signal cascade transmission and make the BIN in the state of receiving signal until the restart after power-off.
Waterproof Level Description
IP20 Non-waterproof (The PCB [Printed Circuit Board] surface of the bare, with a self-adhesive back, For Indoor);
IP65 Waterproof (Epoxy cover waterproof, PCB surface is encapsulated with plastic Gel, with self-adhesive 3M back, For Outdoor & Indoor);
IP67 Waterproof (Silicon sleeve waterproof, PCB is encapsulated with silicon tube, with a plastic fastener, better waterproof, For Outdoor);
Pin Function
DO: Control data signal output
DI: Control data signal input
BO: Backup control data signal output
BI: a Backup control data signal input
GND: Data &Power Grounding
Installation Instruction
Applications
These digital Addressable LED Strips are Applicable to people who would like to pursue fashion and romance, for individual creativity and the new apartment decoration, as its soft, light and thin features very suitable for DIY personal space.
LED programmable digital screen
Hotels decoration lighting
Backlighting decoration
Concealed lighting, Cove decoration
led wall, advertising board
Outdoor advertising signs,
Hotel, KTV, bars,
Wedding party lighting,
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for DCFLS-5V-WS2813X150Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
-Breakpoint-continue-150-LEDs_1.jpg "WS2813 RGB Lights Individually Addressable LED Strip 5V - 30LEDs/m")
-Breakpoint-continue-150-LEDs_2.jpg "WS2813 RGB Lights Individually Addressable LED Strip 5V - 30LEDs/m")
-Breakpoint-continue-150-LEDs_3.jpg "WS2813 RGB Lights Individually Addressable LED Strip 5V - 30LEDs/m")
-Breakpoint-continue-150-LEDs_4.jpg "WS2813 RGB Lights Individually Addressable LED Strip 5V - 30LEDs/m")
-Breakpoint-continue-150-LEDs_5.jpg "WS2813 RGB Lights Individually Addressable LED Strip 5V - 30LEDs/m")
-Breakpoint-continue-150-LEDs_6.jpg "WS2813 RGB Lights Individually Addressable LED Strip 5V - 30LEDs/m")
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
Customers who bought this product also purchased...
Scroll for more →
.jpg "Male Female Screwless 2Pin Single Color LED Strip Lighting Fast Power Supply 5.5*2.1mm DC Connector Accesories")
 20 AWG 4Pin.jpg "4pin RGB+ Power Wire Cable 0.5mm Copper Core For DC12/24V RGB Color Change Flexible LED Strip Lighting, 1meter by sale")
