24-Volt 72 Light/m High Density 5050 DMX Compatible LED Rgb Strip

Model: DMXRGB-UCS512-24V5050X72 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: €40.60
Qty Discounts Off Price
1-9
€40.60
10-19
€39.99
20-39
€39.79
40+
€39.38
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

If your linear atmospheric lighting project is not satisfied with the standard 60 light density, then check out this 72 light per meter ucs512 strip from us. 

This 24V 72-Light DMX RGB product has higher brightness and light uniformity, and will integrate more UCS512H4LB or UCS512C1L dmx 512 IC chips in a five-meter reel length, which is capable of displaying more detailed dynamic effects.

On this 24V 72-Light DMX RGB Model, the spacing between every two LEDs is shortened to 13.88 millimeters, and the ICs used are directly compatible with DMX control systems. To control this led strip RGB via DMX signals, the DMX controller needs to support 60 IC pixels, i.e. 180 DMX address channels.

These RGB address channels are independent and can display different colors and brightness, so DMX strips are usually used in commercial lighting projects and engineering lighting projects.

Click Here For Professional DMX Controller
Click Here For XLR DMX Connectors

 

How to control led strips RGB DMX with smart DMX controller?

Our WiFi dmx controller WT-DMX-M Model (controller in the kit) can directly connect to dmx RGB or RGBW or RGBCCT led tape strips, and switch the color modes via Tuya APP and wireless RF remote control. This wireless control method will be more convenient for home users. LRS-150-24 power supply in the kit to provide constant dc 24V voltage. 

 

Product Specifications

Item Type:  High Density 5050 DMX Compatible LED Rgb Strip
LED Chip: 
SMD5050
Input Voltage:  DC24V
Power: 
18w/m, 90w 5m-roll
LED Color:  Addressable RGB (DMX512 directly compatible)
PCB Width:  12mm
LED Quantity:  72LEDs/m, 360/roll
IC Type:  SOP10 UCS512H4LB or TM512AD
IC Quantity: 

12 ICs/m ( 1 IC controls 6 LEDs),

60 for 5m, 180 addresses.

Cut Unit:
83.33mm/3.28'', 6 LEDs can be cut
Waterproof Rating:  Non-waterproof IP20, Indoor Waterproof IP65, Outdoor Waterproof IP67 IP68
Length:  5m/16.4ft
Working Temperature:  -20℃ ~ +45℃
Lifespan: 50,000+ hours
Beam Angle:  120°
Lumen: 20-22 lm/LED

 

72 Light/m High Density 5050 DMX Compatible LED Rgb Strip

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for DMXRGB-UCS512-24V5050X72
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

24-Volt 72 Light/m High Density 5050 DMX Compatible LED Rgb Strip24-Volt 72 Light/m High Density 5050 DMX Compatible LED Rgb Strip24-Volt 72 Light/m High Density 5050 DMX Compatible LED Rgb Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
IC on this model: UCS512H4L · UCS512C1L. Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Connector options on this model: 5-pin XLR Connectors · JST Fast Connectors. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 12mm (0.47in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.