48 Volts Long DMX-Driven 2835RGB Pixel Mappable LED Tape Dynamic Atmospheric Lights

Name: 48 Volts Long DMX-Driven 2835RGB Pixel Mappable LED Tape Dynamic Atmospheric Lights
Brand: SuperLightingLED
SKU: DMXRGB-48V-2835X120
Price: 47.98 USD
Availability: InStock

Model: DMXRGB-48V-2835X120 Review stars

0.0 (0 Reviews) Various options in stock

Starting at: $47.98

Qty Discounts Off Price
1-9 $47.98	10-19 $47.26	20-39 $47.02	40+ $46.54
* Discounts may vary based on options below

Select Specifications:

Select PCB Width:

10mm (0.39in)

Select Connector Type:

Select Length:

Select Waterproof Rating:

Note:

Select LED Quantity:

120LEDs/m

Qty: -+

Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

Product Information

48V RGBIC led tape systems eliminate voltage drop over long runs, enabling seamless commercial-scale dynamic lighting with 65+ feet continuous installations.

This 48-volt DMX addressable RGB product is available in lengths of up to 20 meters (65.6 feet), so you don't need to inject additional electrical power over a 20-meter run. By placing an adequate 48 volt DC power supply on one side of the tape strip, the light has excellent consistency over the 20m long length with no noticeable voltage drop.

The 48V 2835RGB DMX Model strip light delivers uniform ambient lighting for indoor and outdoor LED applications. The use of SMD2835 LEDs allows it to carry a high density of 120 lights per meter with a low power consumption of only 11 watts per meter (3.35 watts per foot). This is a very efficient and cost effective choice for DMX programmable lighting where light needs to be extended over long distances.

Our DMX light strips are different from other DMX-controllable tapes. You can plug these DMX512-enabled led strips directly into your DMX lighting system without the need for any DMX decoder to convert signals. JST connectors and XLR connectors are provided for easy DMX connection.

Click Here For DMX Controller

How to control DMX RGB strips with smart DMX controller?

Our WiFi dmx controller WT-DMX-M Model can directly connect to dmx RGB or RGBW or RGBCCT led tape strips, and switch the color modes via mobile Tuya APP and wireless remote control.

It should be noted that when the voltage supported by the dmx512 controller is not the same as the voltage of the dmx strip, you need to configure a power supply for them separately. That is, use DC12-36V power supply to drive the controller and use DC48V power supply to drive the light strip, and there can't be a positive connection between the controller and the light strip!

Professional DMX control system can be equipped with professional computer programmed DMX controller.

Product Specifications

Item Type:	48 Volts DMX-Driven Pixel Mappable LED Tape
LED Chip:	SMD2835
Input Voltage:	DC48V
Power:	11w/m, 55w 5m-roll, 110w 10m-roll, 165w 15m-roll, 220w 20m-roll
LED Color:	Addressable RGB (DMX512 directly compatible)
PCB Width:	10mm
LED Quantity:	120 LEDs/m
IC Type:	SOP10 GS8516C
IC Quantity:	10 ICs/m ( 1 IC controls 12 LEDs), 50 for 5m, 150 addresses; 100 for 10m, 300 addresses; 150 for 15m, 450 addresses; 200 for 20m, 600 addresses.
Cut Unit:	100mm/3.94'', 12 LEDs can be cut
Waterproof Rating:	Non-waterproof IP20, Indoor Waterproof IP65, Outdoor Waterproof IP67 IP68
Length:	5m/16.4ft, 10m/32.8ft, 15m/49.2ft, 20m/65.6ft
Working Temperature:	-20℃ ~ +45℃
Lifespan:	50,000+ hours
Beam Angle:	120°
Lumen:	7-8 lm/LED

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for DMXRGB-48V-2835X120

PDFDMXRGB-48V-2835X120 product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF

Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?

Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights

Do I need power injection?

5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light

Which waterproof rating should I choose?

Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating

Can I cut it to length?

Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Connector options on this model: 5-pin XLR Connectors · JST Fast Connectors. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.

What size power supply do I need?

Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply

Will it fit an aluminium profile, and how dense are the LEDs?

PCB width 10mm (0.39in) · LED density 120LEDs/m. Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles

Complete your setup

Picked for this model from items in stock.

Often bought with this itemFrom real orders placed in the last 24 months

DC12V/24V 50mm 6leds 360degree 20balls/string 3D led pixel ball light …$54.98