APA102 5050SMD WW/DW Digital Intelligent Addressable LED Chip, DIY LED Chip, 500PCS By Sale

Model: APA102-5050-WHITE-CHIP Review stars 0.0 (0 Reviews) Various options in stock
Price£59.17
Qty Discounts Off Price
2-14
£59.17
15-29
£57.99
30-79
£56.21
80+
£53.85
* Discounts may vary based on options below
Select Specifications:
Qty: -+Min:  2
*Mixed OFF
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Features

1. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

2. APA102 is used for three color white dimming control IC and string type, it is the use of CMOS technology provides three color white LED output driver to adjust the output, with 256 grayscale and 32 brightness adjustment, APA has two way for signal output, one of them is a clock, the other of them is the data, because the clock and data synchronization,so it makes crystal cascade output movement synchronized.

3. The compact 5050 SMD LED is easy to solder and integrates multiple bright LEDs into the design in  the most compact way. If you would like to use these products for prototyping, it is recommended to use this products and weld them together for PCB-friendly packaging.

4. Advantage: COMS process, low filerting, low power consumption, two-wire synchronization, selg-test signal etc.

APA102 Chips Specifications Download   PDF  

 
Standards and Certifications

DC5V CE FCC RoHS ISA SGS ISO LIFETIME warranty led factory

 

Specifications

LED Chip Model:   SMD 5050

LED resource:   APA102 LED

IC Type:   APA102 IC (1 IC drives 1 led chip)

PCB color:   White Available

Protection rate:   Non-waterproof  

Color Temperature:   3000K/6000K

Power:   0.2w/pcs

LED chip quantity:   500pcs

Voltage:   5V

Dimesion:   5.0*5.0*1.6mm

digital rgb addressable led strip applications

 

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for APA102-5050-WHITE-CHIP
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

APA102 5050SMD WW/DW Digital Intelligent Addressable LED Chip, DIY LED Chip, 500PCS By SaleAPA102 5050SMD WW/DW Digital Intelligent Addressable LED Chip, DIY LED Chip, 500PCS By SaleAPA102 5050SMD WW/DW Digital Intelligent Addressable LED Chip, DIY LED Chip, 500PCS By SaleAPA102 5050SMD WW/DW Digital Intelligent Addressable LED Chip, DIY LED Chip, 500PCS By Sale

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.