DC5V SK6812 Addressable RGB+WW RGB+DW 5050SMD LED Chip, 100PCS By Sale

This SK6812 RGBW SMD5050 LED chip is available in DC5V input. RGB+3000K and RGB+6000K optional. 

● Top SMD internal integrated high quality external control line serial cascade constant current IC;

● control circuit and the chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency;

●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;

●The built-in power on reset and reset circuit, the power does not work;

●gray level adjusting circuit (256 level gray scale adjustable);

● red drive special treatment, color balance;

● line data transmission;

● plastic forward strengthening technology, the transmission distance between two points over 10M;

●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

Features

The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

The SK6812 is very similar to the WS2812B, and it can be used as a drop-in replacement in most applications because it features the same interface and color order (so LED strips based on the SK6812 and WS2812B can be chained together). The main difference between the two drivers is that the SK6812 has voltage-independent color and brightness over a wide voltage range, which means that the colors of the LEDs should not be affected by a drop in the supply voltage as much as they are on the WS2812B.

DC5V SK6812 IC 

Standards and Certifications

Specifications

LED Chip Model:   SMD 5050

LED Resource:   SK6812 RGBW LED

IC Type:   SK6812 IC (1 IC drives 1 led chip)

PCB Color:   White Available

Protection Rate:   Non-waterproof  

LED Quantity:   100pcs

Power:   0.26W/pcs

Input Voltage:   DC5V

Single LED size:   5.5x5.0x1.6mm

Color Temperature:   RGB+Warm White(3000K); RGB+Daylight White(6000K)